Troubleshooting
Reduced Spray OR No Spray
Possible cause
1.Clean water/formula tank may be empty
WARNING:
To reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing.
Remedies
1.Turn power switch off; refill tank with clean hand hot tap water and formula
2. | Clean water/formula tank may not be seated properly | 2. | Turn power switch off; remove tank |
|
|
| and reseat |
3. | Pump may have lost prime | 3. | Turn power switch off; after 1 minute |
|
|
| turn on and depress spray trigger |
|
|
| Be sure there is cleaning formula in the |
|
|
| clean water/formula tank, it will make the |
|
|
| machine prime faster |
4. | Spray tip may be clogged | 4. | Remove spray tip and rinse thoroughly |
|
|
| under hot water. Replace with the |
|
|
| going down into the machine |
No spray through the hose |
|
| |
Possible cause | Remedies | ||
1. | Pump may not be primed | 1. | Turn ReadyTools dial to FLOOR CLEANING |
|
|
| and depress spray trigger for a few a |
|
|
| seconds until you see suction coming up |
|
|
| the nozzle |
|
|
| Turn ReadyTools dial back to TOOLS |
PowerRoller Does Not Turn |
|
| |
Possible cause | Remedies | ||
1. | The brush belt is off or broken | 1. | Refer to page 11, steps |
|
|
| on how to access the belt |
|
| 2. | Look at the belt and check for breakage or |
|
|
| |
|
|
| evidence, replace all parts following steps |
|
| 3. | In the event your belt is broken, a replacement |
|
|
| belt may be ordered at www.bissell.com or by |
|
|
| calling BISSELL consumer services. Refer |
|
|
| to the parts list on page 14. Complete installation |
Machine not picking up solution |
| instructions will come with the replacement belt | |
|
| ||
Possible cause | Remedies | ||
1. | Dirty water tank may not be seated properly | 1. | Turn power switch off; reseat tank |
2. | ReadyTools dial may be on TOOLS | 2. | Turn ReadyTools dial to FLOOR CLEANING |
3. | Float may have shut off | 3. | Turn power switch off and empty tank if |
|
|
| necessary. If tank is not full, wait |
|
|
| 30 seconds and turn power switch on |
4. | Dirty water tank may be full | 4. | Turn power switch off and empty tank |
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store
12 w w w . b i s s e l l . c o m
