Operation

Crevice Tool: Use in tight narrow spaces.

Extension Wand: Use with desired attachment for a longer reach.

Curved Hose Wand: Use with desired attachment for a longer reach or for cleaning hard to reach places.

TurboBrush®: Use rotating brush action for small areas such as stairs and upholstery.

NOTE: Press gently when using the TurboBrush to maximize cleaning.

Too much pressure will cause the brush to stop rotating.

Power cord usage

1.To use your vacuum, remove the cord and plug it into an electrical outlet. For your convenience, there are two quick release cord wraps for easy cord removal. There is also a cord clip that is part of the upper cord wrap where you can attach the cord when vacuuming.

2.When you are finished cleaning, turn vacuum cleaner off.

3.Unplug power cord by grasping the polarized plug (NOT the cord) and disconnect from outlet.

4.Loop power cord around cord wraps on rear of vacuum cleaner. Be sure to first return the quick release cord wraps back to their original position before wrapping the cord.

5.Clip molded plug to power cord to secure.

Quick Release

Cord Wraps

Tip:

Hair, string and small objects can block the vacuum hose or tools. Check them occasionally for obstructions.

NOTICE:

The floor brush will continue to rotate while you use your vacuum for above floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the powerfoot tilt forward.

CAUTION:

The rotating floor brush continues to rotate while tools are in use. To reduce the risk of injury from moving parts, always move the cleaner with the carrying handle. Always place vacuum cleaner on the floor with handle in upright position when using tools. Never place your fingers under the cleaner when it is running. Never place powerfoot on furniture or uneven surfaces. Do not place vacuum cleaner close enough to objects to pull them into rotating brush.

w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

9

Page 9
Image 9
Bissell 82G7 warranty Power cord usage