Maintenance and care
Maintaining TurboBrush
The TurboBrush should be checked regularly for |
|
clogs or debris wrapping around the brush. | 2. |
1.Unplug the vacuum from electrical outlet.
2.If a clog is present or debris is visible, unscrew the two screws on the back of the TurboBrush to remove the faceplate and clear any obstructions.
3. To clean debris from the brush, remove the | 4. |
brush from the drive belt and clean debris. |
|
4.Reposition the drive belt on the brush. Place ends of brush in slots on sides as shown. Reposition faceplate and secure with two screws.
14 w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
