Bissell BS-7920F Pro Heat Pro-Tech, Cleaning of the Red Lint Filter, Prepared by Monique Lania

BS-7920F Pro Heat Pro-Tech

Cleaning of the Red Lint Filter

Remove tank-in-tank assembly from unit

Remove the lid from tank and turn the lid upside down

Remove red lint basket from tank lid and remove any debris stuck in lint basket with your finger tips or an old toothbrush. If it is really dirty soak in hot water for 30 minutes and replace it back into machine

Once clean the red lint filter basket must be clicked securely in place and sealed to ensure maximum suction.

Prevent solution build up in the machine by flushing the machine after cleaning your carpet.

Fill the Tank-in-Tank with hot (not boiling) tap water and fill the SmartMix Bottle with tap water.

Switch grey SmartMix Switch located next to solution SmatMix bottle to ‘Normal’ and switch diverter knob to ‘Carpet Cleaning’ setting

Use the machine on hard surface such as concrete to suck up a quantity of clean water. This will remove any solution build-up.

Empty collection tank and SmartMix bottle at the end of the procedure.

Prepared by Monique Lania 2Care & Maintenance of Bissell Deep Cleaner