Cleaning of front window nozzle
Fill the
Switch grey SmartMix Switch located next to solution SmatMix bottle to ‘Normal’ and switch diverter knob to ‘Carpet Cleaning’ setting
Use the machine on hard surface such as concrete to suck up a quantity of clean water. This will remove any solution
Empty Collection Tank and SmartMix bottle at the end of the procedure.
For any difficult to remove debris that is trapped in the front window nozzle after flushing the machine, it is advisable to use a thin piece of flexible plastic to dislodge the debris.
Cleaning underneath the front window nozzle
Wipe underneath surface with a soft cloth
Ensure after each use that hair and debris are removed from the brush roller using your fingertips or a pair of scissors, paying particular attention to the leaver arms. This will prolong the life of the brush belt.
Prepared by Monique Lania | 3Care & Maintenance of Bissell Deep Cleaner |