Operation
Empty the dirty water tank
1.When the dirty water tank level reaches the FULL line, when the float trips or when finished carpet cleaning, turn power switch OFF ( O ).
2.Remove dirty water tank by lifting straight up and carry it to the sink or wherever you plan to dump the dirty water.
3.Remove the tethered cap on the rear of the tank.
4.Pour out the dirty water, rinse tank and replace the cap.
5.To continue carpet cleaning refer back to page 7 beginning with "Fill the clean/solution tank."
If cleaning is complete, refer to the “Maintenance and care” section on page 11.
Pretreating (optional)
1.Pretreating (optional)
Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entry ways and hallways. Please keep in mind that pretreating will wet the carpet and could impact dry time.
To pretreat:
A.Using the BISSELL Tough Stain
B.Wait
C.Clean as normal using your BISSELL PROdry, following the instructions on page 7.
Ready Tools™ (cleaning with attachments)
Your PROdry carpet cleaner comes equipped with a hose and at least two attachments for cleaning stairs, upholstery, stains and more.
Important! If using the machine to clean upholstery, check upholstery tags.
1.Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your PROdry. If the tag is coded with “X” or “S” (with a diagonal strike through), or says “Dry Clean Only,” do not proceed. Do not use on velvet or silk. If manufacturer’s tag is missing or not coded, check with your furniture dealer.
8 w w w . b i s s e l l . c o m
WARNING:
To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the carpet cleaner.
the warranty.
Manufacturer’s tag
8 0 0 . 2 3 7 . 7 6 9 1
10/14/08 1:25:59 PM |
