Black & Decker 500 Sample RUN Times, Troubleshooting, Service Information, Care and Maintenance

BPS500B ManualENSP 041008.qxp 4/10/2008 10:42 AM Page 6

SAMPLE RUN TIMES

Appliance	Watts*	Run Time**	Product	Watts*	Run Time**
Laptop computer	30	12 h	Table lamp	40	9 h
Inkjet printer	20	16 h	Desktop computer	70	5 h
Cordless phone	5	74 h	17" LCD monitor	35	10 h
Cell Phone	5	74 h	13" TV	50	7 h
Internet modem	10	35 h	Clock radio	6	62 h

Combination of Appliances	Run Time**
Laptop, cordless phone, Internet modem/router	up to 8 h.5
13" TV, cell phone charger, table lamp	up to 4 h
Desktop computer, 15" LCD monitor, inkjet printer, Internet modem, cordless phone, table lamp	up to 2 h.5

*Rated power may differ from appliance’s actual average power consumption.

**Run times are based on loads tested under regular operating conditions and are approximate.

TROUBLESHOOTING

General

Problem	Solution
The unit will not power ON	• Connect the unit’s power cord to the wall outlet securely
	• Make sure that the internal battery is charged (check the Battery
	Status Icon on the LCD Display). If charge is low, recharge the
	battery. If battery will not accept a charge after 24 hours, refer to
	the “Service Information” section.
Appliances connected to unit lose power	A fault condition is present. Check the LCD Display for fault condition
	message and take the appropriate action (refer to the Fault Condition
	chart that follows).
Appliances connected to unit malfunction or	Appliances connected to the unit do not accept modified sine wave
overheat	form. Refer to “CAUTION: TO REDUCE THE RISK OF DAMAGING
	RECHARGEABLE APPLIANCES” on page 3.
Inadequate run time	Make sure that the internal battery is charged (check the Battery

Should the battery need replacing, it is recommended that the unit be returned to manufacturer for battery replacement. Contact Customer Service, toll-free, at (800) 544-6986.

This unit contains a maintenance-free, sealed, non-spillable, lead acid battery, which must be disposed of properly. Recycling is required — contact your local authority for information. Failure to comply with local, state and federal regulations can result in fines or imprisonment. For more information on recycling this battery, call toll-free (800) 822-8837.

WARNINGS

•Do not dispose of product in fire as batteries inside this product may explode or leak. •Do not expose the unit containing a battery to fire or intense heat as it may explode.

SERVICE INFORMATION

All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under "Tools—Electric" or call: 1-800-544- 6986 or visit www.blackanddecker.com.

CAUTION

If the cord becomes damaged, return the entire unit to manufacturer immediately for service/repair.

FULL ONE-YEAR HOME USE WARRANTY

Black & Decker (U.S.) Inc. warrants this product for one year against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways.

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.

The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required. Black & Decker owned and authorized Service Centers are listed under "Tools-Electric" in the yellow pages of the phone directory and on our website www.blackanddecker.com.

This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state or province to province. Should you have any questions, contact the manager of your nearest Black & Decker Service Center. This product is not intended for commercial use.

FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-544-6986 for a free replacement.

Status Icon on the LCD Display). If charge is low, recharge the battery.

If battery will not accept a charge after 24 hours, refer to the “Service

Information” section.

Fault Conditions

Following is a list of fault conditions, the corresponding LCD Display messages and recommended remedies.

LCD Message	Fault Condition	Recommended Remedy
OVERLOAD	Shows when an overload condition exists (total	Reduce load to 500 watts (continuous).
	wattage draw exceeds 500 watts) or appliances	Manually reset unit by pressing ON/OFF
	connected to unit have a surge power that	Pushbutton OFF, then ON again.
	exceeds 500 watts.
SHORT CIRCUIT	Shows when an appliance that is plugged into	Unplug the appliance from the unit and take
PROTECTION	the unit is short-circuited.	appliance to a qualified technician for repair.
		Manually reset unit by pressing ON/OFF
		Pushbutton OFF, then ON again.
LOW BAT	LOW BATTERY WARNING. Shows when	Disconnect load. Recharge battery (refer to
	the unit’s battery charge level drops below 10.5	“Charging/ Recharging the Unit”).
	volts. An audible will sound.

CARE AND MAINTENANCE

Storage

1.Ideal storage temperature range is 0-25°C (32-77°F).

2.Store and use the unit in a cool, dry place with adequate ventilation for all-around air circulation.

3.Avoid locations that are exposed to heating units, radiators, direct sunlight, or excessive humidity or dampness.

Battery Replacement/Disposal

This product has a sealed lead acid battery that should be kept fully charged. Charge before first use, immediately after each use, and once every two months if not used regularly. Failure to do this may reduce the battery life dramatically.

SPECIFICATIONS

Transfer Switch:	20 milliseconds
UPS On (no-load current draw):	< 1.5 A (battery drain)
Recharging Time:	Approx. 8 hours from 120V AC
Inverter Specifications
Output Power (max. continuous):	500 W
Surge Power (peak):	1000 W
Output Voltage (nominal):	120V AC
Output Frequency:	60 Hz ±2 Hz
Output Wave Form:	Modified sine wave
12 Volt DC Specifications
Internal Battery Type:	Sealed lead acid, AGM
Internal Battery Capacity:	40 amp-hours
Internal Battery Voltage:	12 VDC (nominal)
Low Battery Alarm:	10.5 V (nominal)
Low Battery Shutdown:	10.0 V (nominal)
Internal Charger Charging Current:	6 A DC (max.)
USB Charging Ports
Output:	Greater than 5 amps
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.	RD041008

See ‘Tools-Electric’

– Yellow Pages – for Service & Sales

6

7