WARNING: To minimize the risk of eye injury, always use eye protection. Carbide is a hard but
brittle material. Foreign objects in the work piece such as wire or nails can cause tips to crack or break.
Only operate saw when proper saw blade guard is in place. Mount blade securely in proper rotation
before using, and always use a clean, sharp blade.
WARNING: Do not cut ferrous metals (steel), masonry, glass or tile with this saw.
A dull blade will cause slow, inefficient cutting overload on the saw motor, excessive splintering, and
could increase the possibility of kickback.

OPERATING INSTRUCTIONS

WARNING: To reduce the risk of serious personal injury, read, understand and follow all
important safety warnings and instructions prior to using tool.
WARNING: Shock hazard. Under no circumstances should this product be used near water.
WARNING: To reduce the risk of injury, turn off and remove battery from the tool before
making any adjustments or removing or installing attachments or accessories.
WARNING: Risk of lacerations or burns. Do not touch work piece or blade immediately
after operating the tool. They can become very hot. Handle carefully. Always allow accessories and
workpiece to cool before handling.
IMPORTANT: Refer to Power Unit instruction manual before operating this tool for all safety warnings
and details on installing and removing attachments.
1. Trim saw attachment
2. Lock-off button
3. Spindle lock
4. Wrench
5. Shoe
6. Upper guard
7. Lower saw blade guard
8. Retracting lever
1
2
5
6
7
4
38
PARTS AND FEATURES

OPERATION

• To switch the tool on, press the variable speed switch on the power unit. The tool speed depends
on how far you press the switch.
• To switch the tool off, release the variable speed switch.
NOTE: This tool attachment only operates in the forward direction; the forward/reverse slider of the
Power Unit should not be able to be switch to reverse.
9
ENGLISH
(Original instructions)