Black & Decker BDH2000L Removing the dust bowl and filters figures E, F, & G, Pre-filter figure F

Removing the dust bowl and filters (figures E, F, & G)

WARNING: The filters are re-usable and
	E
should be cleaned regularly.
• Press the release latch and pull the dust bowl
straight off as shown in figure E.
• While holding the dust bowl over a bin or sink,
pull out the filter to empty the contents of the
bowl.
• To replace the dust bowl, place it back onto the
handle until it “clicks” firmly into position.

WARNING: Never use the appliance
without the filters. Optimum dust collection will	F
only be achieved with clean filters.
Pre-filter (figure F)		F1
The Pre filter and Pre Filter Housing can be
separated to allow better cleaning.
• Twist the Pre Filter (F1) in a clockwise direction
and lift from the Pre Filter Housing (F2)
		F2
Quick clean filter (figure G)	G	G1
• Lift the filter cleaning handle.
• While holding the quick clean filter housing
(G1), turn the filter cleaning handle (G2) to
perform a quick clean of the filter.
• Pull the filter out of the quick clean filter
housing for more thorough cleaning.

G1

Cleaning the dust bowls and filters

•The dust bowls and filters can be washed in warm soapy water.

•Make sure that the filters and the dust bowl are dry before re-fitting.

Nozzle / Accessories

•Figure H - A crevice tool is built into the nozzle and can be extended by pulling the extension piece until it locks into position.

H

6