WARNING: Fire hazard. Do not store or carry battery so that metal objects can contact exposed battery terminals. For example, do not place battery in aprons, pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc.

Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Transportation Hazardous Material Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes (i.e., packed in suitcases

and carry-on luggage) UNLESS they are properly protected from short circuits. So when transporting individual batteries, make sure that the battery terminals are protected and well insulated from materials that could contact them and cause a short circuit.

NOTE: Lithium-Ion batteries should not be put in checked baggage.

Storage Recommendations

 

 

1. The best storage place is one that is cool and dry away from direct sunlight and

excess heat or cold.

 

 

2. Long storage will not harm the battery pack or charger.

 

Battery Pack Charging Procedure

 

Black & Decker chargers are designed to charge Black & Decker battery packs in 4-8

hours depending on the pack being charged.

 

 

1. Plug the charger (7) into an appropriate outlet before inserting the battery pack (5).

2. Insert the battery pack into the charger as shown in Figure B.

 

 

 

 

3. The green LED will flash indicating that the battery is

B

 

 

 

 

 

being charged.

 

 

 

 

 

 

 

4. The completion of charge is indicated by the green

 

 

 

 

 

 

 

 

LED remaining on continuously. The pack is fully charged

 

 

 

 

 

 

 

 

and may be used at this time or left on the charger.

 

 

Recharge discharged batteries as soon as possible

 

 

after use or battery life may be greatly diminished. For

 

longest battery life, do not discharge batteries fully.

It is

 

recommended that the batteries be recharged after each

 

use.

 

 

Charger Diagnostics

This charger is designed to detect certain problems that can arise with the battery packs or the power source. Problems are indicated by one LED flashing in different patterns.

Bad battery

The charger can detect a weak or damaged battery. The red LED flashes in the pattern indicated on the label. If you see this bad battery blink pattern, do not continue to charge the battery. Return it to a service center or a collection site for recycling.

Hot/Cold pack delay

When the charger detects a battery that is excessively hot or excessively cold, it automatically starts a Hot/Cold Pack Delay, suspending charging until the battery has normalized. After this happens, the charger automatically switches to the Pack Charging mode. This feature ensures maximum battery life. The red LED flashes in the

pattern indicated on the label.

Leaving the battery in the charger

The charger and battery pack can be left connected with the green LED glowing indefinitely. The charger will keep the battery pack fresh and fully charged.

Important Charging Notes

1. Longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 65°F and 75°F (18°- 24°C). DO NOT charge the battery pack in an air temperature below +40°F (+4.5°C), or above +105°F (+40.5°C). This is important and will prevent serious damage to the battery pack.

2. The charger and battery pack may become warm to touch while charging. This is a normal condition, and does not indicate a problem. To facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an uninsulated trailer.

3. If the battery pack does not charge properly:

a. Check current at receptacle by plugging in a lamp or other appliance

b. Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights.

c. Move charger and battery pack to a location where the surrounding air temperature is approximately 65°F - 75°F (18°- 24°C).

d. If charging problems persist, take the tool, battery pack and charger to your local service center.

5

Page 5
Image 5
Black & Decker BDH2000SDL Storage Recommendations, Battery Pack Charging Procedure, Charger Diagnostics, Bad battery

BDH2000SL, BDH2000SDL specifications

The Black & Decker BDH2000SDL and BDH2000SL are two innovative handheld vacuum cleaners designed to make cleaning tasks more efficient and user-friendly. Both models are part of Black & Decker's commitment to providing powerful and versatile cleaning solutions for modern households.

One of the standout features of the BDH2000SDL is its Smart Charge Technology, which optimizes battery usage and prolongs the life of the vacuum. This technology allows the vacuum to charge faster while using less energy, making it an eco-friendly choice for consumers. The BDH2000SL, while lacking Smart Charge, still offers impressive performance and longevity during use, with its rechargeable lithium-ion battery providing fade-free power throughout its runtime.

Both models boast a powerful motor that delivers strong suction capabilities, allowing them to pick up debris, pet hair, and dust with ease. The BDH2000SDL includes a rotating slim nozzle that enhances maneuverability in tight spaces, increasing its versatility. This is particularly beneficial for cleaning corners, under furniture, and other hard-to-reach areas.

Additional features include a washable filter that captures fine dust particles and allergens, helping to improve indoor air quality. The filter can be easily removed and cleaned, ensuring that maintenance is straightforward and hassle-free. Furthermore, both vacuums feature a lightweight design, making them easy to carry and operate, even for extended periods.

The BDH2000SDL also has an integrated crevice tool stored on board, which provides convenient access for tackling narrow gaps and crevices. The BDH2000SL, while it may not include the integrated tool, can still accommodate attachments for diverse cleaning tasks.

With a stylish and ergonomic design, both models are not only efficient but also aesthetically pleasing. The easy-to-use controls ensure that users can seamlessly switch between different cleaning modes and settings. In summary, whether you choose the Black & Decker BDH2000SDL or the BDH2000SL, you can expect superior performance, convenience, and advanced cleaning technologies that make tackling household messes easier than ever.