WALL MOUNTING

1.Choose a mounting location which will allow installation of hardware directly into wall studs or adequate structural support.

2.Insert eight screws (22, provided) to secure the two hooks (provided) on the specific area of the wall that you marked. All applications will require different hardware, so please consult with a professional prior to installation.

3.The screw length must be long enough to engage the wall stud. Leave approximately 7/8 of the screw (bolt) exposed to properly hang fan.

4.When mounting the fan to the wall, the cord set must be located outside the body of the fan.

CLEANING INSTRUCTIONS

WARNING: To avoid the risk of electrical shock, always make sure the fan is unplugged from the electrical outlet before cleaning or servicing.

1.Make sure that the guards and blade are clean to prevent damage to the fan motor and improve efficiency.

2.The fan can be cleaned with either a vacuum or a can of compressed air.

3.Remove the front guard using a screw-driver with a magnetic tip to remove the three screws that secure the grill to the fan.

4.The blade and rear blade guard can’t be removed from the fan.

5.To clean the front guard, turn it counterclockwise to loosen the screws and pull off the guard. To place the front guard back on, match the shape of the shaft to the inside groove of the guard and push in. Screw fastener on clockwise to tighten.

6.Take the guard off and wipe it with a cloth or use a can of compressed air. Make sure the front guard is completely dry before securing it back onto the fan.

7.Wipe the fan blades (do not remove them) with a damp cloth dipped in a light solution of water and mild detergent.

8.Allow all parts to dry completely before reassembling the front guard. Never operate the fan without the guards securely in place.

9.The blade and rear guard cannot be removed. They must be completely dry before you can secure the guard back in its place.

10.Do not use any chemical cleaners such as acid, alcohol, etc, to clean the fan.

CARE AND MAINTENANCE

WARNING: Do not attempt to open any part of the motor housing, as it can cause electrical shock. This fan has been permanently lubricated at the factory and therefore will never require further lubrication. Additional lubrication of electric motor parts could create a fire hazard.

1.Fan should be stored in its original box and in a room with low humidity.

2.Make sure the fan is completely dry before using it.

NOTE: If you experience any problems, return the fan to the place of original purchase. Do not attempt to open the motor housing. Doing so may result in damage or personal injury.

IMPORTANT SAFEGUARDS

WARNING: To reduce the risk of electrical shock, do not attach the fan to a window or place the fan near a window.

WARNING: To reduce the risk of a fire or electrical hazard, DO NOT USE EXTERNAL DEVICES TO CONTROL FAN SPEED.

READ ALL INSTRUCTIONS BEFORE USING

1.Only use this unit as instructed in this manual. Any other uses may cause a fire, hazard or an electric shock.

2.The fan is intended to cool rooms for INDOOR, DOMESTIC HOUSEHOLD use only. Therefore, the fan should not be used in commercial or industrial locations. In addition, the fan should not be used outdoors, attached to a window or placed near a window.

3.This product is not recommended with use of electrical extension cords, this will greatly increase risks of fire and or electrical shock.

4.To reduce the risk of personal injury and electric shock, the fan should not be played with or placed where small children can reach it. Never leave children unattended when the fan is on or plugged in.

5.Always unplug the fan from the outlet before cleaning, when not in use or when moving the fan from one location to another.

6.Never submerge the fan in water.

7.Do not operate the fan in the presence of explosive and/or flammable fumes.

8.Do not place the fan or any of its parts near an open flame or a cooking or other heating appliance.

9.Never insert your fingers or anything else through the fan guards. Never drop or insert objects into any of the fan's openings.

10.Never plug the fan into an outlet with wet hands or a wet cord.

11.Do not operate the fan if it has a damaged cord or plug. Instead, return it to an authorized dealer in which you purchased the product or call the customer service number for assistance.

12.Avoid touching the fan when its parts are moving.

13.Never yank the cord. When disconnecting the fan, grip the plug and pull it from the outlet.

14.Do not operate the fan if the front and rear grill are damaged or not securely tightened.

15.To ensure a longer durability, avoid using the fan 24 hours a day, seven days a week.

16.Do not run the cord under carpeting. Do not cover the cord with throw rugs, runners, or similar covers. Do not place the cord under furniture or appliances. To prevent people from tripping and hurting themselves, ensure cord is away from traffic areas.

17.This product has overload protection (i.e. a fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows up, immediately unplug the fan from the outlet. Replace the fuse as per the User Servicing Instructions and follow product instructions to properly check the fuse rating. If the replacement fuse blows up, it could be because of a short circuit. Regardless of the reason, do not use the fan. Instead, return it to an authorized dealer in which you purchased the product or call customer service for assistance.

6

3

Page 2
Image 2
Black & Decker BDHV3016 Cleaning Instructions, Care and Maintenance, Wall Mounting, Read ALL Instructions Before Using

BDHV3016 specifications

The Black & Decker BDHV3016 is a compact and powerful handheld vacuum designed to meet the demands of modern cleaning. Ideal for quick clean-ups around the home, this device emphasizes convenience, performance, and user-friendly features.

One of the standout features of the BDHV3016 is its impressive suction power. Equipped with a 16V lithium-ion battery, it delivers strong performance, allowing users to tackle dirt, debris, and pet hair with ease. The cordless design enhances mobility, enabling users to reach tight corners and high places without the hassle of cords.

The BDHV3016 incorporates a transparent, easy-to-empty dustbin with a capacity that is sufficient for a variety of small tasks. This feature eliminates the frustration of dealing with dust bags and makes maintenance straightforward. Users can simply detach the bin, empty it, and snap it back into place, ensuring a quick transition from cleaning to storage.

Another notable characteristic is the inclusion of a variety of attachments that enhance the versatility of the vacuum. The crevice tool helps to access narrow spaces, while the brush attachment is perfect for upholstery and delicate surfaces. This adaptability makes the BDHV3016 suitable for cleaning cars, furniture, and stairs.

In terms of technology, the BDHV3016 boasts Smart Charge technology that optimizes charging to reduce energy consumption. With a fast charging time of roughly four hours, the vacuum is ready to go when you are, ensuring that it won't sit idle for long.

The design of the BDHV3016 is also user-centric, featuring an ergonomic handle that provides comfort during prolonged usage. The lightweight nature of the vacuum makes it easy to carry around the house without causing strain.

Overall, the Black & Decker BDHV3016 combines solid performance with a user-friendly interface, making it an excellent choice for those in need of a reliable and efficient handheld vacuum. With its powerful suction, versatile attachments, and convenient charging technology, it stands out in the crowded market of cleaning devices, appealing to both everyday users and cleaning enthusiasts alike.