assembly instructions

1.Locate and remove all loose parts from the carton.

2.Cut four corners of the carton from top to bottom and lay the panels flat.

3.Place handle (C)

onto frame (J),

depress the snap buttons, and slide the handle assembly onto the frame until snap buttons snap into place.

CAUTION: Risk of personal injury. Avoid placing hands between handle and frame when assembling to pre- vent pinching.

4.Connect wand (N) to gun (O). Tighten securely.

5.

Attach

high

 

pressure hose

 

(D) to gun (O).

 

T i g h t e n

 

securely­.

 

6.To Assemble Quick Connect

Grommets:

a.Squeeze grommet and place into hole, fitting groove to rim.

b.Push grommet into place.

c.Repeat steps until all grommets are assembled.

7.Remove four colored quick connect nozzles (A) from plastic bag and insert them into correct grommet on the nozzle holder. NOTE: Nozzles are color coded to match colored nozzles on panel.

NOTE: The high pressure pump was filled with oil at the factory. There is no need to add oil at this time, see the Maintenance section of this manual for Maintenance information.

8.Roll the unit off the carton and discard carton.

WARNING: Risk of bursting. Use a tire pressure gauge to check the tires pressure before each use and while inflating tires; see the tire sidewall for the correct tire pressure.

NOTE: Air tanks, compressors and similar equipment used to inflate tires can fill small tires similar to these very rapidly. Adjust pressure regulator on air supply to no more than the rating of the tire pressure. Add air in small incre- ments and frequently use the tire gauge to prevent over inflation.

operaTING INSTRUCTIONS

Pressure Washer

Terminology

PSI: Pounds per Square Inch. The unit of measure for water pressure. Also used for air pressure, hydraulic pressure, etc.

GPM: Gallons Per Minute. The unit of measure for the flow rate of water.

CU: Cleaning Units. GPM multiplied by PSI. GPM x PSI = CU

9-­ ENG

Page 8 Page 10
Page 9
Image 9
Black & Decker BDP2600 Assembly instructions, OperaTING Instructions, Roll the unit off the carton and discard carton
Page 8 Page 10

BDP2600 specifications

The Black & Decker BDP2600 is a versatile and powerful tool that has garnered attention in the realm of home improvement and DIY enthusiasts. This tool is specifically designed to meet the needs of both amateur and professional users, offering a range of features and technologies that enhance its performance and usability.

One of the standout features of the BDP2600 is its powerful motor that delivers high performance for a variety of applications. Whether you're drilling, sanding, or performing other tasks, the motor ensures efficient operation, reducing the time and effort required to complete projects. The tool's design incorporates an ergonomic handle, providing comfort during prolonged use, which is especially important for users engaged in detailed work.

The BDP2600 is equipped with a variable speed control feature, allowing users to adjust the speed according to the task at hand. This flexibility is crucial when dealing with different materials, as it helps achieve optimal results without compromising on safety. Additionally, a built-in safety lock ensures that the tool can only be activated when intended, reducing the risk of accidents.

Another notable technology in the BDP2600 is its durable construction. Built to withstand the rigors of frequent use, this tool features quality materials that contribute to its longevity. The robust design not only enhances durability but also improves reliability, making it a preferred choice for many DIY projects and professional applications alike.

The BDP2600 also offers an array of attachments and accessories, further increasing its versatility. These attachments allow the tool to perform a wide range of functions, from drilling into various surfaces to sanding and polishing. This multifunctionality makes the BDP2600 a valuable addition to any toolkit.

In conclusion, the Black & Decker BDP2600 stands out for its powerful motor, ergonomic design, variable speed control, safety features, and robust construction. With its extensive range of applications and accessories, it is tailored to meet the diverse demands of users. Whether you are tackling small home repairs or larger renovation projects, the BDP2600 is a reliable and efficient tool that facilitates ease and precision in your work. Its blend of innovation and practicality continues to make it a popular choice in the competitive market of power tools.
Top Page Image Contents