Black & Decker BT1000 Service Information, Full Two-Year Home Use Warranty, Accessories

630669-00,BT1000 manual 2/15/05 8:11 AM Page 16

TROUBLE! BLADE DOES NOT COME UP TO SPEED

WHAT’S WRONG?	WHAT TO DO…
1.Extension cord too light or too long.	1.Replace with adequate
	size cord.
2.Low house current.	2.Contact your electric
	company.
TROUBLE! MACHINE VIBRATES EXCESSIVELY
WHAT’S WRONG?	WHAT TO DO…
1.Saw not mounted securely.	1.Tighten all mounting
	hardware.
2.Stand or bench on uneven floor.	2.Reposition on flat level
	surface.
3.Damaged saw blade.	3.Replace blade.
TROUBLE! DOES NOT MAKE ACCURATE MITER CUTS
WHAT’S WRONG?	WHAT TO DO…
1.Miter scale not adjusted correctly.	1.Check and adjust.
2.Blade is not square to fence.	2.Check and adjust.
3.Workpiece moving.	3.Clamp workpiece to
	fence or glue 120 grit
	sandpaper to fence with
	rubber cement.
TROUBLE! MATERIAL PINCHES BLADE
WHAT’S WRONG?	WHAT TO DO…
1.Cutting bowed material.	1.Position bowed material
	as shown in Figure 15.

Service Information

Black & Decker offers a full network of company-owned and authorized service locations throughout North America. All

Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you.

If you have any questions, call 1-800-54-HOW-TO

To find your local service location, refer to the yellow page directory under "Tools—Electric" or call: 1-800-54-HOW TO (544-6986). FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-544-6986 for a free replacement.

ACCESSORIES

CAUTION: The use of any non-recommended accessory such as dado sets, molding cutters or abrasive wheels may be hazardous.

Full Two-Year Home Use Warranty

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways:

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.

The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required. Black & Decker owned and authorized service centers are listed under "Tools-Electric" in the yellow pages of the phone directory. This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Should you have any questions, contact the manager of your nearest Black & Decker Service Center.

This product is not intended for commercial use.

Black & Decker (U.S.) Inc.,	See ‘Tools-Electric’
701 E. Joppa Rd.	– Yellow Pages –
Towson, MD 21286 U.S.A.
	for Service & Sales

16