Properly main tained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g)Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for opera- tions different from those intended could result in a hazardous situation.
5)Service
a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Additional Safety Instructions For Australia And New Zealand
a)Young children and the infirm. This appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with this appliance.
b)Replacement of the supply cord. If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Service Centre in order to avoid a hazard.
•
WarningThe use of any accessory or attachment, other than those recommended in this instruction manual, may present a risk of personal injury.
Have your tool repaired by an Authorised Service Agent. This electrical tool is in accordance with the relevant safety requirements. Repairs should only be carried out by an Authorised Service Agent using original spare parts, otherwise this may result in considerable danger to the user.
•Supply cord. If the supply cord of this tool is damaged it must only be replaced by a Black & Decker Authorised Service Centre to avoid a hazard.
SPECIFIC SAFETY INSTRUCTIONS FOR
BLOWER/VACUUM/SHREDDER TRAINING
•Ensure safe working distance while in blow mode.
•Never allow children or persons who are unfamiliar with this type of product to use it, nor anyone who has not read this instruction manual.
•Do not allow children, animals or other persons
near your product when in use - always keep them at least 6m (20’) away from the working area.
•Remember that the operator/user is responsible for accidents or hazards occurring to other people or their property.
•Your product is designed for use on 120 or 220V AC
(mains) electrical supplies only - do not attempt to use on any other supply.
•Never carry your product by the cable or jerk the cable. Keep the cable away from heat sources, oils or sharp edges. Check the condition of your cable before use and do not use if damaged.
Preparation
•Do not use your product barefoot or in open sandals or thongs.
•To protect your feet, always wear stout shoes or boots - freshly cut grass is damp and slippery. Rubber or man made footwear will enhance your safety.
•
Use protective equipment. Wear safety spectacles or goggles whilst operating your product
in blow mode.
•Use a face mask if dusty.
•Use ear protection, especially if the sound level seems uncomfortable when using your product.
•Wear long trousers to protect your legs.
•
Warning! Secure long hair so it is above shoulder length. Keep loose clothing, ties, tassles and hanging straps away from openings and moving parts.
•The power supply cable should be regularly inspected for signs of damage or ageing, and only used if in good condition.
•Always be sure your product is in a safe operating condition and all parts are secure before use.
•Do not operate the product if any parts are defective or worn.
•Do not pick up burning materials such as cigarette butts or smouldering ashes.
•Do not pick up breakable objects such as glass, plastics etc.
•Do not operate the blower/vac in a gaseous or explosive atmosphere as motors in these tools normally spark and this may ignite fumes.
•Not to be used by persons under the age of 16 or persons who have not read this instruction manual. You are responsible if there is an accident.
OPERATION
•Do not use in vacuum mode without the collection bag in place.
•Always switch off and remove the plug from the electricity supply when:
–The supply cable has become damaged or entagled.
–You leave your product.
–Clearing a blockage
–Checking, adjusting, cleaning or working on your product.
•Do not place the inlet or outlet of the vacuum near eyes or ears when operating.
Warning! Do not use your product in the rain and do not allow it to get wet. Avoid using the product in wet conditions.
18
