•Use your product only in daylight or good artificial light switched on in either blow or vacuum mode
•Always be sure of your footing, particularly on slopes.
•Do not pick up matter that may be contaminated with flammable or combustible liquids such as petrol, or use in areas where they might be present.
•Do not place any objects into the openings. Never use if the openings are blocked - keep free of hair, lint, dust and anything that may reduce the airflow.
•
Warning! Always use your product in the manner outlined in this instruction manual. Your product is designed to be used in an upright mode and if it is used in any other way it may result in injury. Never run your product whilst it is lying on its side or upside down.
ASSEMBLY PRIOR TO USE
The BV2200 Blower/Vac only requires the blower vac tube and the debris bag to be fitted to the power head before it can be used for the first time.
Blower Vac Tube (Fig. 3 & 4)
To fit the Blower Vac Tube to the power head assembly. Line up the Blower/Vac tube with the power head tube and insert the lower tube into the power head tube fully so there is no gap between the edge of the power head and the trim on the Blower/Vac tube.
WARNING! DO NOT OPERATE WITH OUT THE LOWER TUBE ASSEMBLED
Note: The tube is not designed to be removed once it is assembled to the power head tube.
To Fit the Debris Bag (Fig. 5 & 6)
The debris bag is attached to the Blower/Vac via a large handle fitted over the outlet spigot of the power head and also via a strap, connecting to the front underside of the Blower/Vac tube. To fit the debris bag, orientate the bag as per the diagram (Fig.5), insert the large handle and bag onto the outlet spigot.
After fully inserting the handle onto the outlet spigot, rotate the bag fitting upwards until the fitting locks into place. Push the handle forward to engaged fully.
USING THE BLOWER/VAC
Prior to turning the blower vac on ensure the following:
•Please take the time to read and understand the instruc- tion manual
•You are wearing suitable clothing and safety equipment. (Safety Glasses or Face Shield / Ear protection)
•You are aware of other people in the area where you will be working.
•The debris bag is correctly secured to the outlet of the Power Head and the blow/vac tube is locked in position.
19
