6.When grinding is done, remove the ground coffee container from the grinder by pulling it away from the unit, lift lid up and off. Scoop directly from the ground coffee container into a permanent or paper filter in the brew basket.
Coffee Bean Care
Whole coffee beans should be stored in an airtight container at room temperature for up to 1 month or in the freezer for up to 3 months, for the freshest flavor. When ready to use, beans can be ground while still frozen. Extra ground coffee can be stored in an airtight container to retain flavor.
Note: Ground coffee container should not be used for any purpose other than holding ground coffee. The grinding bowl is not washable and if used for spices or nuts, there will eventually be a transference of flavors. It is recommended that you purchase a separate grinder for nuts and spices.
Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified service personnel.
1.Always unplug the unit before cleaning.
2.Remove the ground coffee container with lid and wash in warm, soapy water – not in the dishwasher.
3.Use the cleaning brush to sweep away any excess particles left in the ground coffee chute (C).
Important: The ground coffee chute must be kept clear, or the ground coffee container will not lock into position once it is replaced, and the grinder will not operate properly.
C
4.Open the grinding bowl cover and turn the lock and release knob clockwise to unlock the grinding
assembly (D). You will hear a series of clicks and the grind selection dial will rotate as you twist; you will then hear a distinct pop when the assembly is unlocked.
D |
|
| 5. Remove the grinding assembly (E) and wash in warm, |
| |
| soapy water. Rinse and dry thoroughly. |
| 6. The cleaning brush can also be used to sweep out any |
| excess particles gathered under grinding assembly. |
| Once all excess particles have been removed, the |
| cleaning brush may be washed in warm, soapy water |
| 7. Wipe the grinding bowl, cover, base and other parts |
E | with a slightly damp cloth or sponge. Dry all parts |
thoroughly before reassembling. |
5 | 6 |
