®
SKU #CC2000/#CC2001
®
SKU #CC2000/#CC2001
®
SKU #CC2000/#CC2001
Thank you for buying a Black & Decker paper shredder. Black & Decker paper shredders have become the benchmark for innovation, performance and quality to protect against identity theft. We have taken great care in designing and engineering a product to meet your needs.
To ensure years of safe, efficient performance, please read these important product usage and safety instructions.
If you have any questions regarding the product, please feel free toSetup
•Check shredder for damage or defects. (To notice some particles of paper is normal due to product testing.)
•Plug the power cord into any easily reached standard outlet.
•To use, have the power switch (1), located on the back of the shredder, in the ON
•Press the on/off switch (2) to activate the
•Place allotted amount of paper into the shredder. Shredder will automatically activate.
Customer Service
Black & Decker has a
and Canada. Our customer service phone number is
Maintenance
ALWAYS UNPLUG shredder before performing any maintenance. It is important to empty the waste bin regularly to ensure the smooth operation of the cutting cylinders. Regular oiling is also necessary for proper performance. It is recommended to use the shredder oil every few weeks. Do not use flammable synthetic oil,
WARNING: Hazardous moving parts. Keep fingers and other body parts away.
WARNING: To reduce risk of fire, electrical shock or injury:
NEVER allow children to operate a paper shredder, even under adult supervision. A paper shredder is NOT a toy.
DO NOT use flammable synthetic oil,
DO NOT operate any electrical product with a damaged cord. ALWAYS keep the power cord clear of the shredder opening.
AVOID getting jewelry, hair or loose clothing too close to feed slot as serious injury can occur. DO NOT handle plug or product with wet hands.
(=) indicates Forward
(o)when illuminated
2
on/off switch
3
forward and reverse buttons
6
ALWAYS unplug before emptying bin.
1
power switch
(on back)
4
indicator light
5
pull out bin
7
aerosols of any kind on or near product at any time. Shredder oil may be purchased at most retailers in the shredder section of the store.
Troubleshooting
If you have a problem with your shredder, check the symptoms and remedies below. If you cannot solve the problem this way, contact Black & Decker paper shredders Customer Service. Do not open shredder head to attempt repair: It could expose you to electric shock and will void your warranty.
Symptom | Remedy |
|
|
Shredder does not start or stops | - Make sure shredder is plugged in, power switch on |
while shredding. | back of unit (1) is in the ON |
| on/off switch (2) so that it is illuminated, and on. |
|
|
Shredder overheat indicator | - Wait 30 minutes for shredder to cool down before |
light is on. | trying again. If shredder is overheated, indicator |
ALWAYS keep children and pets away from the shredder.
ALWAYS unplug shredder when not in use, to perform routine maintenance, to clear a paper jam, and when transporting or storing shredder.
DO NOT attempt to feed more sheets of paper than specified on the feeder.
DO NOT attempt to shred materials other than paper, credit cards, CDs and DVDs ALWAYS empty the wastebasket prior to becoming full.
DO NOT place shredder near heat or water source. NEVER carry the shredder by the cord.
DO NOT open shredder head to attempt repair: It could expose you to electric shock and will void your warranty.
The
| WA R N I N G | ALWAYS KEEP CHILDREN CLEAR OF SHREDDER |
|
WARNING ICONS: The icons on top of the shredder warn the user of the potential dangers if the shredder is used improperly.
NO | NO FINGERS | NO LOOSE | NOT | NO | NO | ||
HAIR | OR HANDS | CLOTHING | A TOY | AEROSOL CANS | FASTENERS | ||
|
|
|
|
|
|
|
|
Product Information
This product is built to shred paper, CDs, DVDs, credit cards, and staples.
It is not built to shred large paper clips, continuous forms, adhesive labels, transparencies, newspaper, cardboard or other plastic. Using it for these purposes is likely to cause irreparable damage.
Forward and Reverse Buttons
Forward and reverse buttons surround the on/off switch. If jam occurs and auto reverse process stops, you can alternate between forward (=) and reverse
Indicator Light
To provide
If the light below the thermometer icon is ILLUMINATED, the shredder needs to cool down. Simply turn off the shredder and let cool for approximately 30 minutes.
If the light above the bin full icon is FLASHING, the shredder bin needs to be emptied. Unplug shredder, empty the bin and replace bin for continued use.
| light (4) will be on. |
|
|
Paper jam. | - In case of a paper jam, which may occur if the sheet |
| capacity is exceeded or if paper is not put in |
| straight, turn off the shredder, unplug and empty |
| the bin (5) if full. Prepare shredder for use. Then: |
| 1. If the shredder remains jammed, use the forward and |
| reverse buttons (3) surrounding the on/off switch (2) |
| marked (=) for forward and |
| the buttons between forward and reverse to the clear |
| the jam. |
| 2. If the jam still does not clear, unplug shredder and |
| carefully grasp the paper and pull out slowly. |
| 3. Once the jam is cleared, plug in, turn on and press the |
| on/off switch to continued shredding. |
|
|
Shredder squeaks, grinds or | - Oil cutting cylinders regularly. |
runs below capacity. |
|
|
|
Shredder continues to run for | - No action required. |
2 or 4 seconds after shredding | This is a |
has been completed. |
|
