Manuals / Black & Decker / Kitchen Appliance / Food Processor

Black & Decker CG700 manual Overhang Molding Installation

Models: CG700

1 23
Download 23 pages 55.91 Kb
Page 6
Image 6

Note: If you are connecting this appliance to the receptacle of another †SpaceMaker™ appliance such as the toaster oven or coffeemaker, make sure you can easily unplug the appliance following use.

13. Your †SpaceMaker™ appliance is now ready for use!

OVERHANG MOLDING INSTALLATION

For cabinets with an overhang molding (see Illustration C)

Important: Always wear protective glasses or goggles to prevent injury when drilling.

Note: Spacers are provided in case your cabinet has an overhang molding at the front edge. Only use spacers on the rear screws of the appliance to ensure it is level with the front.

1.Clear countertop under installation area to avoid getting dust or debris on other appliances or items. Open cabinets and remove contents to make mounting easier.

2.Clean both the underside and topside of the bottom panel of the cabinet.

3.Using a ruler, measure the thickness of the overhang molding (G), accurately noting the number for use in the following step.

G

Note: If you do not have a ruler, you may cut out the paper ruler provided on the edge of your mounting template.

4.After measuring the overhang molding thickness as shown in Illustration G, look at the dashed lines on the mounting template; each line has a measurement next to it that indicates the thickness of the overhang molding used with that line. For example, if your cabinet has an overhang molding thickness of ½”, you will use the ½” dashed line on the template.

5.Fold the template along the dashed line that matches the thickness of your overhang molding.

6.Place the folded template against the back edge of the overhang molding, making sure the side with the drill hole marks is facing down (H).

H

Important: Do not align screw holes on template directly under the partition between cabinets, as this will prevent you from installing the appliance properly. Pay close attention to where the drill holes will be set so as not to damage your cabinets during mounting. Drilling through your cabinet’s partition may cause damage to cabinets and prevent proper installation.

7.Making sure to keep the fold line straight against the back edge of the overhang molding, tape the template securely in place.

8.Drilling from under the cabinet up, drill holes through the 4 places marked on the template using a ¼-inch drill bit (J).

J

Important: Always ensure you are drilling straight up through the marked mounting holes on the template. Drilling at an angle may prevent proper installation and may damage cabinets if the drill bit pierces the partition.

9.Once holes are drilled, remove tape and mounting template.

10.Wipe dust and debris off the underside and topside of the cabinet surface.

11.Place a washer inside the cabinet over each of the 4 holes you drilled.

12.Now, use your ruler or the paper ruler provided to measure the overhang molding height, placing your ruler vertically against the underside of the cabinet behind the overhang molding. This number determines the number of spacers you need, using a number of spacers equal to the overhang molding height. For example, a 1” overhang molding would use 2, ½” spacers on each of the rear holes (K).

K

13.Drop one of your screws through each of the washers covering the holes in the cabinet, from inside the cabinet down.

Note: To determine which screws to use, you must have enough of the screw exposed underneath the cabinet to properly thread the screw into the nut.

10

11

Page 5 Page 7
Page 6
Image 6
Black & Decker CG700 manual Overhang Molding Installation
Page 5 Page 7

CG700 specifications

The Black & Decker CG700 is a versatile and reliable electric grill designed for those who appreciate convenience without compromising on taste. This compact grill features a sleek design that fits seamlessly into any kitchen or outdoor space, making it an excellent addition for both casual cooks and culinary enthusiasts.

One of the main features of the CG700 is its powerful 1,500-watt heating element, which allows for rapid preheating and consistent cooking temperatures. This ensures that food is cooked evenly, retaining its natural flavors and juices. The grill is equipped with a non-stick cooking surface, which not only makes it easy to clean but also helps to minimize the use of additional oils and fats, promoting healthier cooking.

The CG700 boasts a spacious grilling area, enabling users to prepare multiple servings at once, whether it be burgers for a gathering or a feast of vegetables for family dinners. The grill plates can accommodate a variety of foods, including meats, seafood, and vegetables, providing flexibility for a wide range of culinary creations.

Safety and convenience are prioritized in the design of the CG700. It features a built-in temperature control system that allows users to adjust settings based on the food being cooked. Additionally, the grill has an automatic shut-off feature, which enhances safety by preventing overheating. The cool-touch handles ensure that users can operate the grill safely without the risk of burns, even during busy cooking sessions.

Furthermore, the CG700 benefits from a drip tray that collects excess grease and drippings, ensuring a cleaner cooking environment and making post-cooking clean-up easier than ever. This thoughtful design element works in tandem with the grill’s overall compact build, allowing it to be easily stored away when not in use.

With its combination of powerful performance, user-friendly features, and safety technologies, the Black & Decker CG700 electric grill stands out as an excellent choice for home cooks looking to elevate their grilling game. Its versatility makes it suitable for a range of diets and cooking styles, ensuring that everyone can enjoy delicious grilled meals year-round. Whether you're grilling indoors during the winter months or enjoying a summer cookout, the CG700 is an ideal companion for delicious and easy meal preparation.