6
7
GETTINGSTARTED
• Remove all packing material, labels and any stickers.
• Remove and save literature.
• Unpack mounting parts and set them aside in a safe place where they will not
roll away or get lost.
Important:Donotattempttooperateapplianceuntil itisproperlyinstalled.
CHOOSEALOCATION
When choosing your location, consider the following:
• DO make sure to mount within reach of an electrical outlet.
• DO consider your normal work patterns in the kitchen when choosing location.
• DONOT mount over any heating or cooking appliance such as your range or
oven.
• DONOT mount over or near a sink.
• DONOTmount under, in front of or behind any under-cabinet light fixtures.
Note:If mounting multiple †SpaceMaker™ appliances and you are installing your
appliance next to the SpaceMaker™ oven (Fig.A.):
• Allow at least 1” between the control panel side of the oven and the appliance.
• Allow at least 4” between the side opposite the control panel of your oven and
adjacent wall or other appliance. You can mount the other appliances flush to
one another.
†. MountingParts
 (Part#SDC-MOUNTINGKIT)
A.6Spacers
    ½"
    ¼"
    /6"
    /6"
B.Screws
    "
    ½"
    ¼"
�� C.Washers
 . MountingTemplate(inbox)
Youwillalsoneed:
• Tape
• Ruler(oryoumaycutouttherulerprovidedonthetemplate)
• Electricdrillwitha¼”drillbit
A
ACB
A.
4” 1”
4”
1”