Use
Switching on and off
• Figure G - To start, slide the On/Off switch forward (i.e. “O”= Off, “I” = On).
• To stop, slide the switch back.
• Return the product to the charger immediately after use so that it will be ready and fully charged for the next use. Ensure that the product is fully engaged with the power supply plug.
DRY
• For everyday spills of dry material.
G |
WET AND DRY
• For everyday spills of dry material, use your appliance without the squeegee accessory. CAUTION: Your product is designed for light spills only.
• This vacuum can also be used to pick up everyday liquid spills. Use the squeegee accessory on
• For best performance on hard surface wet pickups, insert squeegee into the bowl nozzle opening.
• For best results when using this accessory, hold the appliance at an angle of 45° and pull it slowly towards you.
• Do not fill the bowl beyond the end of the intake chute. If there is any liquid in the bowl, do not turn the unit upside down, sideways, point the nozzle upward, or shake the vac excessively.
• After picking up liquid substances clean the vac and filter immediately. Mold and mildew may form if the unit is not properly cleaned after wet pickups.
• If charging in a vertical position, be sure to empty all liquid contents to avoid damage to your appliance.
Cleaning the product (figures H, I, J and K)
WARNING: Never use the vac
without its filter.H NOTE: The filter is
it with a disposable dust bag, and do not throw it away when the product is emptied. We recommend that you replace the filter every
• Figure H - Remove the dust bowl by pressing the bowl release button and pulling the bowl straight off.
• To replace the dust bowl, place it back onto the handle until it “clicks” firmly into position.
5