Black & Decker D25850, D25550, D25650 Repairs, Full Warranty, DAY no Risk Satisfaction Guarantee

582429-00/D25500 etc 1/29/03 9:29 AM Page 7

5. Press the ON/OFF switch and start working. replacement.

6.Push only with enough force to keep bit from bouncing. Pushing harder will not increase chipping speed.

7.To stop the tool, release the ON/OFF switch. Always turn the tool OFF when work is finished and before unplugging.

8.D5830 and D25850 are chipping hammers only. They have no drilling capabilities.

Accessories

Recommended accessories for use with your tool are available at extra cost from your distributor or local service center.

CAUTION: The use of any non-recommended accessory may be hazardous.

Repairs

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

Full Warranty

DEWALT heavy duty industrial tools are warranted for one year from date of purchase. We will repair, without charge, any defects due to faulty materials or workmanship. For warranty repair information, call 1-800-4-DEWALT. This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces.

In addition to the warranty, DEWALT tools are covered by our:

30 DAY NO RISK SATISFACTION GUARANTEE

If you are not completely satisfied with the performance of your DEWALT heavy duty industrial tool, simply return it to the participating seller within 30 days for a full refund. Please return the complete unit, transportation prepaid. Proof of purchase may be required.

FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-4-DEWALT for a free

D25550 1 9/16" (39mm)

ROTARY HAMMER

TYPE 1 SER. 120V AC 60Hz

11.0 A (NOM 11,0 A) no 140 - 280 RPM no 1330 - 2660 BPM

WARNING AVERTISSEMENT

FOR SAFE OPERATION, READ INSTRUCTION MANUAL. ALWAYS USE PROPER EYE AND RESPIRATORY PROTECTION. ALWAYS USE SIDE HANDLE. FOR SAFE OPERATION USE ONLY IDENTICAL REPLACEMENT PARTS. À TITRE PRÉVENTIF, LIRE LE GUIDE

D'UTILISATION. MADE IN ENGLAND

DEWALT INDUSTRIAL TOOL CO.,

701 EAST JOPPA ROAD, BALTIMORE, MD 21286 USA FOR SERVICE INFORMATION, CALL 1-800-4-DEWALT www. DEWALT.com

English

7