Black & Decker DR260BR instruction manual Extension Cords

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disperse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.

WARNING:  ALWAYS use safety glasses.  Everyday eye glasses are NOT safety glasses.  Also use face or dust mask if cutting operation is dusty. 

ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT: 

• ANSI Z87.1 eye protection (CAN/CSA Z94.3) 

• ANSI S12.6 (S3.19) hearing protection

• NIOSH/OSHA/MSHA respiratory protection

WARNING: Always wear proper personal hearing protection that conforms to ANSI S12.6 (S3.19) during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.

The label on your tool may include the following symbols.						amperes
V			volts	A
Hz			hertz	W		watts
min			minutes		or AC	alternating current
		or DC....	direct current	no		no load speed
			Class I Construction			earthing terminal
	.................				..................
			(grounded)	.../min or rpm		safety alert symbol
	.................		Class II Construction			revolutions or
bpm			(double insulated)			reciprocation per minute
			beats per minute		..................	Use proper respiratory protection
		.............	Read instruction manual before use		..................	Use proper eye protection
	.................		Use proper hearing protection

Extension Cords

When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

Volts			Minimum Gauge for Cord Sets
			0-25	Total Length of Cord in Feet
120V				26-50	51-100	101-150
240V			(0-7,6m)	(7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
			0-50	51-100	101-200	201-300
Ampere Rating			(0-15,2m) (15,2-30,4m) (30,4-60,9m) (60,9-91,4m)
				American Wire Gauge
More		Not more
Than	-	Than	18	16	16	14
0		6
6	-	10	18	16	14	12
10	-	12	16	16	14	12
12	-	16	14	12	Not Recommended

4