Black & Decker DW901, DW900, 383609-01 manual Operation Tips, Accessories, Full Warranty, Chargers

DW900,DW901/383609 bc 5/8/02 2:59 PM Page 6

viewed from the rear of the tool).

	7)	While holding the tool with the open end	FIG. 8
English		up, allow the motor to drop into the tool.
	8)	about 1/4" into the tool housing (Figure
		Insert the 1/4" hex wrench into the
		spindle, and turn the spindle until the
		gear teeth on the motor engage with the
		gears in the tool. The motor will drop
		8).
	9)	Inspect all leads for damage; repair or
		replace as required.

10)Reattach motor leadwires, routing wires around the motor can. The wires should be routed down and inward near the LED. Ensure the wires are not blocking the LED.

11)Replace the endcap, tighten the four fasteners to 0.9 N-m head torque.

Operation Tips

•Pulling the trigger once uses about the same amount of battery power as driving one fastener. Avoid running the tool at “no-load” to conserve battery power.

•Avoid “feathering” the trigger. Allow the tool to stop automatically when driving a fastener.

Accessories

Recommended accessories for use with your tool are available at extra cost from your distributor or local service center.

CAUTION: The use of any non-recommended accessory may be hazardous.

6

BATTERY PACKS

DW9072	12.0V 4/5 Cell, Standard Capacity
DW9074	12.0V 4/5 Cell, Standard Capacity with State of
	Charge Indicator
DW9070	12.0V High Capacity XR™ Pack
CHARGERS
DW9106	1 Hour Charger
DW9115	15-Minute Charger
DW9107	XR2 Charger

Important

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

Full Warranty

DEWALT heavy duty industrial tools are warranted for one year from date of purchase. We will repair, without charge, any defects due to faulty materials or workmanship. For warranty repair information, call 1-800-4-DEWALT. This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces.

In addition to the warranty, DEWALT tools are covered by our:

30 DAY NO RISK SATISFACTION GUARANTEE

If you are not completely satisfied with the performance of your DEWALT heavy duty industrial tool, simply return it to the participating seller within 30 days for a full refund. Please return the complete unit, transportation prepaid. Proof of purchase may be required.

FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-4-DEWALT for a free replacement.