Black & Decker EF2750 Inspection and repairs, Electrical safety, Mains plug replacement, English

ENGLISH

•When not in use, the appliance should be stored in a dry place. Children should not have access to stored appliances.

Inspection and repairs

•Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.

•Do not use the appliance if any part is damaged or defective.

•Have any damaged or defective parts repaired or replaced by an authorised repair agent.

•Before use, check the power supply cord for signs of damage, ageing and wear.

•Do not use the appliance if the power supply cord or mains plug is damaged or defective.

•If the power supply cord or mains plug is damaged or defective it must be repaired by an authorised repair agent in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.

•Never attempt to remove or replace any parts other than those specified in this manual.

•Do not attempt to repair the appliance. Take it to your nearest Black & Decker-owned or authorised Service Centre for repair.

Electrical safety

•This product must be earthed. Always check that the power supply corresponds to the voltage on the rating plate.

•Power plugs must match the outlet. Never modify the plug in any way. Do not use any

adapter plugs with earthed (Class 1) appliances. Unmodified plugs and matching outlets will reduce the risk of electric shock.

Extension cables & Class 1 product

•A 3-core cable must be used as your appliance is earthed and of Class 1 construction.

•Up to 30m (100ft) can be used without loss of power.

•If the supply cord is damaged, it must be replaced by the manufacturer or an authorized Black & Decker Service Center in order to avoid a hazard.

Mains plug replacement

If a new mains plug needs to be fitted:

•Safely dispose of the old plug

•Connect the brown lead to the live terminal of the new plug

•Connect the blue lead to the neutral terminal

•If the product is class I (earthed), connect the green/yellow lead to the earth terminal.

Note: If your product is class II double insulated (only 2 wires in the cord set), no connection is to be made to the earth terminal.

Follow the fitting instructions supplied with good quality plugs

Any replacement fuse must be of the same rating as the original fuse supplied with the product.

Warning! The above section on mains plug replacement is for authorized service centre personals.

4