English
Whisking Guide
Ingredients | Quantity | Speed Setting |
|
|
|
Eggs | 4 | 1 – Max |
|
|
|
Cake mix | 800g | 8 – Max |
|
|
|
Cream | 500g | 8 - Max |
|
|
|
As a Slicer / Shredder
Carefully fit the required blade (18, 19, 20, 21, 22 or
23)to the blade carrier (17) so that the cutting edges are in line with the smooth face of the blade carrier.
Place the chopping blade spindle (16) onto the metal pin in the centre of the bowl then place the holder & blade over the hexagonal portion of the spindle.
The bowl pusher should be left in place during use to prevent spills.
Place the assembled bowl in the recess in the motor housing (1).
Rotate the swivel head back towards the motor housing & push it down until it latches in place.
Connect the appliance to a suitable electrical supply.
Rotate the speed control (3) to the desired speed.
Remove the pusher from the inlet chute & add the ingredients through the inlet chute, using the pusher to gently press them onto the cutting blade.
Note: Never insert fingers or allow loose clothing, jewellery, hair, etc. to enter into the inlet chute.
Add ingredients until the bowl is full or sufficient ingredients have been processed then rotate the control back to 0 to turn the appliance off.
Press the swivel head release button (5), guiding the swivel head (2) as it lifts.
Lift the bowl from the appliance.
Remove the lid then take the blade carrier & spindle from the bowl before transferring the ingredients to a suitable container.
The blades can be removed from the carrier by carefully pushing it in the opposite direction of assembly.
Note: The large French fry blade (25) has a unique carrier (23). This cannot be used for any other blade. The large French fry blade & carrier are used in the same way as the other carrier & blades.
Slicing / Shredding Guide
Ingredients | Quantity | Speed Setting |
|
|
|
Carrots | 500g | 1 - 3 |
|
|
|
Radish | 500g | 1 – 3 |
|
|
|
Squash | 1,000g | 1 – 3 |
|
|
|
Cucumber | 1,000g | 1 – 3 |
|
|
|
Cheese | 500g | 1 – Max |
|
|
|
Potato | 500g | 1 – 3 |
|
|
|
As a Blender
Carefully fit the upper jug blade (29) over the lower jug blade (28) rotating the blades in a clockwise direction so they lock together.
Note: The blades should be at
Remove the jug lid (30) and fit the blades onto the metal pin in the centre of the bowl before replacing the lid, making sure the seal (32) is in place.
Ingredients can be added to the jug while the lid is off, or by inserting them through the hole left when the jug lid cap (31) is removed.
Note: Never insert fingers or allow loose clothing, jewellery, hair, etc. to enter into the inlet.
Press the swivel head release button (5), guiding the swivel head (2) as it lifts.
Note: The swivel head cannot be raised if the speed selector (3) is in any position other than “OFF”.
Place the assembled jug in the recess in the motor housing (1).
Rotate the swivel head back towards the motor housing & push it down until it latches in place.
Connect the appliance to a suitable electrical supply.