English
Processing Guide
Ingredients |
| Quantity |
|
| Speed Setting |
| Time (seconds) |
|
|
|
|
|
|
|
|
Meat |
| 1,000g |
|
| Max |
| 10 to 20 |
|
|
|
|
|
|
|
|
Onions |
| 700g |
|
| 5 - Max |
| 10 to 20 |
|
|
|
|
|
|
|
|
Nuts |
| 600g |
|
| Max |
| 10 to 20 |
|
|
|
|
|
|
|
|
Fish |
| 700g |
|
| Pulse - Max |
| 10 to 20 |
|
|
|
|
|
|
|
|
Cheese |
| 700g |
|
| Pulse – Max |
| 10 to 20 |
|
|
|
|
|
|
|
|
Carrots |
| 700g |
|
| Pulse – Max |
| 20 |
|
|
|
|
|
|
|
|
Apples |
| 700g |
|
| 5 – Max |
| 10 to 20 |
|
|
|
|
|
|
|
|
Mayonnaise |
| 4 eggs / 1 litre oil |
|
| 8 - Max |
| 20 |
|
|
|
|
|
|
| |
As a Dough Mixer |
|
|
| Note: The maximum capacity of this appliance is | |||
Fit the dough blade (14) over the chopping blade |
|
| 800g of dough (500g of flour and 300g of water). | ||||
|
| As a Whisk |
| ||||
spindle (16), rotating the blade in a clockwise |
|
|
| ||||
direction so it locks onto the spindle. |
|
| Fit the whisk (15) over the chopping blade spindle | ||||
|
|
|
|
| |||
Remove the bowl lid (9), fit the spindle & blades |
|
| (16), rotating the whisk in a clockwise direction so it | ||||
onto the metal pin in the centre of the bowl. Place |
|
| locks onto the spindle. |
| |||
the ingredients in the bowl, & |
|
| Remove the bowl lid (9) then fit the spindle & blades | ||||
sure the lid seal (10) is in place. |
|
| |||||
|
| onto the metal pin in the centre of the bowl. Place | |||||
|
|
|
|
| |||
Liquid ingredients can be added to the bowl through | the ingredients in the bowl, & | ||||||
the chute in the lid. |
|
|
| sure the lid seal (10) is in place. |
| ||
Fit the bowl pusher (11) into the inlet chute in the lid. | Liquid ingredients can be added to the bowl through | ||||||
This should be left in place during use to prevent |
|
| the chute in the lid. |
| |||
spills. |
|
|
| Fit the bowl pusher (11) into the inlet chute in the lid. | |||
|
|
|
|
| |||
Press the swivel head release button (5), guiding the | This should be left in place during use to prevent | ||||||
swivel head (2) as it lifts. |
|
|
| spills. |
| ||
Note: The swivel head cannot be raised if the speed | Press the swivel head release button (5), guiding the | ||||||
selector (3) is in any position other than “OFF”. |
|
| swivel head (2) as it lifts. |
| |||
Place the assembled bowl in the recess in the motor | Note: The swivel head cannot be raised if the speed | ||||||
housing (1). |
|
|
| selector (3) is in any position other than “OFF”. | |||
Rotate the swivel head back towards the motor |
|
| Place the assembled bowl in the recess in the motor | ||||
housing & push it down until it latches in place. |
|
| housing (1). |
| |||
Connect the appliance to a suitable electrical |
|
| Rotate the swivel head back towards the motor | ||||
supply. |
|
|
| housing & push it down until it latches in place. | |||
Rotate the speed control (3) to the desired speed |
|
| Connect the appliance to a suitable electrical | ||||
until the ingredients are mixed as required then |
|
| supply. |
| |||
rotate the control back to 0 to turn the appliance off. | Rotate the speed control (3) to the desired speed | ||||||
Press the swivel head release button (5), guiding the | until the ingredients are mixed as required then | ||||||
swivel head (2) as it lifts. |
|
|
| rotate the control back to 0 to turn the appliance off. | |||
Lift the bowl from the appliance. |
|
| The pulse button (4) can be used instead of the | ||||
Remove the bowl lid, spindle & dough blade, & |
|
| speed control. |
| |||
|
| Press the swivel head release button (5), guiding the | |||||
transfer the ingredients to a suitable container. |
|
| |||||
The blades can be removed from the spindle by |
|
| swivel head (2) as it lifts. |
| |||
|
| Lift the bowl from the appliance. | |||||
rotating it in an |
|
| |||||
Note: Never use the whisk (15) to knead dough. |
|
| Remove the bowl lid, spindle & whisk, & transfer the | ||||
Note: When preparing dough, do not operate the |
|
| ingredients to a suitable container. | ||||
|
| The whisk can be removed from the spindle by | |||||
appliance for longer than 20 seconds. After 20 |
|
| |||||
seconds use, wait at least 2 minutes before |
|
| rotating it in an | ||||
operating the appliance again. |
|
| |||||
|
|
|
|
|