English
Rotate the speed control (3) to the desired speed until the ingredients are blended as required then rotate the control back to 0 to turn the appliance off.
The pulse button (4) can be used instead of the speed control.
Press the swivel head release button (5), guiding the swivel head (2) as it lifts.
Lift the bowl from the appliance.
Remove the jug lid then carefully remove the spindle
&blades & transfer the ingredients to a suitable container.
The blades can be removed from the spindle individually, rotating them in an
As a Juice Extractor
Place the juice extractor (33) over the metal pin in the centre of the jug (27) & fit the juice extractor lid (34), making sure the seal (32) is in place.
Place the juice extractor pusher (35) into the inlet chute in the juice extractor lid (34).
The pusher should be left in place during use to prevent spills.
Place the assembled juicer in the recess in the motor housing (1).
Rotate the swivel head back towards the motor housing & push it down until it latches in place.
Connect the appliance to a suitable electrical supply. Rotate the speed control (3) to the Maximum speed.
Remove the pusher from the inlet chute & add the ingredients through the inlet chute, using the pusher to gently press them into the juicer.
Note: Never insert fingers or allow loose clothing, jewellery, hair, etc. to enter into the inlet chute. If ingredients jam in the juicer, use the pusher.
Note: If it is not possible to clear a blockage using the pusher, switch off & disconnect the appliance from the electrical supply, then raise the swivel head & open the jug to clear the blockage manually.
Add ingredients until the jug is full or sufficient ingredients have been processed then rotate the control back to 0 to turn the appliance off.
Press the swivel head release button (5), guiding the swivel head (2) as it lifts.
Lift the bowl from the appliance.
Remove the lid & juicer before transferring the ingredients to a suitable container.
Maintenance
Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance or cleaning of the tool, disconnect the appliance from the power supply.
Ventilation slots should be cleaned occasionally with a clean, dry paint brush.
Cleaning
The motor housing (1) should be cleaned with a clean damp cloth only.
The stainless steel blades can be cleaned in a dishwasher.
Alternatively, they can be washed in warm soapy water. Rinse with clean water and dry thoroughly with a dry soft cloth.
All other parts should be washed in warm soapy water. Rinse with clean water and dry thoroughly with a dry soft cloth.
Note: Do not use abrasives or chemical cleaners on any part of this appliance.
Technical data |
| FX1200 |
Voltage | V | |
Power input | W | 1,000 |
Cable length | m | 1.0 |
Container size | l | Processor Bowl 2.2lt |
|
| Blender Bowl 1.5lt |
Weight | kg | 9.92Kg |
|
|
|
Protecting the environment
Separate collection. This product must not be disposed of with normal household waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose it off with other household waste. Make this product available for separate collection.
Separate collection of used products and packaging allows materials to be recycled and used again. Use of recycled materials helps
prevent environmental pollution and reduces the demand for raw materials.
Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. A list of authorised Black & Decker repair agents and full details of our
