Gardena RL 20, RL 10, RS 10 manual 5.3Working position Fig. C

5.3Working position (Fig. C)

Just hold unit at the handle (5) and push Grass Shears RS 10 / RL 10 along on its sled for grass edges and lawn surfaces. The Grass Cutter RL 20 is equipped with wheels (8) and an additional guide handle (9) enabling ease of use.

5.4Cutting lawn edges and difficult areas (Fig. D)

For a vertical cut hold the Grass Shears RL 10 with both hands and turn the unit into cutting position. The additional guide handle on the Grass Cutter RL 20 ensures safe handling and pushing especially for a lateral cut.

Adjustment of the guide handle for RL 20 (Fig. A/C)

The guide handle can be adjusted by releasing the adjustment knob (10), and tightening, when the desired position is achieved.

5.5Cutting Grass against walls, trees and fences (Fig. E)

Slide the Grass Shears / Grass Cutter with the outer side of the cutting blade along hard objects and surfaces.

6.Maintenance / Service / Storage The GARDENA Grass Shears

and Grass Cutter are largely main- tenance-free.

Please make sure that the con- tacts of the attachment part (1) and of the Accu (11) are always clean.

Grass and dirt should be removed with a dry rag or brush.

The Grass Shears / Grass Cutter should be cleaned thoroughly before and after use, and the cutting blades lubricated with a biodegrad- able oil. This improves the cutting performance. Never grease cutting blades!

Repairs may only be performed by GARDENA Service Centres or by dealers authorised by

GARDENA.

Attention! Always remove Athe Accu before working on the Grass Shears / Grass Cutter. Risk of injury!

Due to risk of injury to persons and/or product damage, do not clean the Grass Shears / Grass Cutter under running water, especially under high pressure.

Store the Grass Shears / Grass Cutter in a dry, frost-free place. Keep out of the reach of children.

Always cover the blades with the protective sheath (7) for storage.

Observe the manufacturer’s installation hints when exchang- ing the cutting blades.

Exchanging the cutting blades Only use the original GARDENA Spare Blades, Art. No. 2346.

These blades can be obtained at your GARDENA dealer or directly from the GARDENA service centre.

Never use spare parts and ac- cessories which have not be designed by the manufacturer.

15