Gardena RL 10, RL 20, RS 10 manual only for Accu-PackAP 12, Art. No. 4. Proper use

2.Charging unit: accu-system V12 Battery Charger NL12,

Art. No. 2105 (for Accu A 12 and Accu-Pack AP 12)

accu-system V12 High-Speed Battery Charger SL 60, Art. No. 2100

(only for Accu-Pack AP 12, Art. No. 2110)

4. Proper use

The GARDENA Grass Shears and Grass Cutter have been designed for cutting grass edges and small grass areas in private gardens.

These appliances are for private use only and are not designed for use in public places, parks, sports arenas, street-scapes, in agriculture or forestry.

It is absolutely necessary to ob- serve the manufacturer’s operating instructions to ensure the unit’s proper functioning. These instruc- tions also contain hints on service, maintenance and repair.

Attention! For safety rea- Asons the Grass Shears /

Grass Cutter should not be used for trimming hedges or for chopping material for composting.

5. Initial Operation (Fig. A- E)

5.1How to click-in / remove the Accu (Fig. B)

Snap the Accu (11) into the attach- ment part (1). Make sure that the Accu has been snapped in properly. Listen for a “click” when doing this.

The Accu (11) can be released from the unit by simultaneously pressing in the two orange locking buttons (4) on the handle (5) or on the Accu-Pack if you are using the AP 12.

Please read the operating instruc- tions of Accu A 12 / Accu-Pack AP 12.

5.2Operation (Fig. A/A1)

Grass Shears RS 10 Simultaneously press the on/off switch (2) and the safety switch (3). The safety switch (3) can be re- leased having started the Grass Shears. When releasing the on/off switch (2), the Grass Shears will switch off automatically.

Grass Shears RL 10 /

Grass Cutter RL 20

The unit is switched on by pressing the on/off switch (2) at the handle

(5). When releasing the on/off switch (2), the Grass Shears / Grass Cutter will switch off auto- matically.

The safety devices installed Aon the unit by the manu- facturer must not be removed or by-passed, e. g. by binding the on/off switch to the handle, as there is risk of injury!

Do not operate the unit with an external power source!

Caution! The blades take a while to stop running after the unit has been switched off.

14