Cleaning and maintenance
Warning!
uDo not store chemicals in the appliance.
uDo not use aggressive or abrasive cleaning agents.
uAlways read and follow the manufacturer's instructions on the cleaning agent you use.
uDispose of the contaminated liquid in accordance with local regulations.
Cleaning the tank
The appliance should be cleaned after use.
uRemove the power head (8).
uIf there is any liquid left, drain the liquid back into the original container or store in an appropriate container.
uFill the tank (9) to 1/3 of its volume with clean water and soap. Warning! Do not use flammable liquids for cleaning.
uReplace the power head (8).
uSpray the contents of the tank until the tank (9) is empty.
uRepeat the previous instruction as many times as required.
Cleaning the filter (fig. D1)
If the stream of the liquid weakens the filter can be clogged. To clean the filter proceed as follow:
uUnscrew the tank cap (5).
uRemove the suction tube (6) from the tank (9).
uClean the filter with warm soapy water.
Troubleshooting
If the tool does not operate correctly, check the following.
Fault | Possible cause | Action |
The stream of liquid | Filter clogged. | Check the filter at the |
weakens or stops. |
| end of the suction tube. |
|
| Clean the filter with |
|
| warm soapy water. |
| Weak battery. | Recharge the battery. |
| Suction tube not all | Push the suction tube the |
| way down in the | completely down. |
| tank. |
|
The unit will not start. | Battery not charged. Check the battery | |
|
| charging requirements. |
Protecting the environment
Z Separate collection. This product must not be disposed of with normal household waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product zavailable for separate collection.
Storing (fig. G & H)
Warning! Do not store in locations where the temperature is below 0 °C.
uClean and dry all parts of the appliance when not in use for more than one day.
uAttach the wand handle (4) onto the side clips (22) (fig. G).
uFit the hose (23) with the Velcro fastener (24) to the power head (8) (fig. H).
Accessories
The performance of your tool depends on the accessory used. Black & Decker and Piranha accessories are engineered to high quality standards and designed to enhance the performance of your tool. By using these accessories you will get the very best from your tool.
Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our
10