Intended use

Your Black & Decker cordless three-position pivot drill/ screwdriver has been designed for drilling in wood, metal and plastics as well as for screwdriving purposes. This tool is intended for consumer use only.

Safety instructions

General power tool safety warnings Warning! Read all safety warnings and all

! instructions. Failure to follow all instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

1.The term "power tool" in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

1. Work area safety

a.Keep work area clean and well lit. Cluttered and dark areas invite accidents.

b.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c.Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety

a.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d.Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e.When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f.If operating a power tool in a damp location is unavoidable, use a Residual Current Device (RCD)

protected supply. Use of an RCD reduces the risk of electric shock.

3. Personal safety

a.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b.Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c.Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

d.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e.Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f.Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g.If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards.

4. Power tool use and care

a.Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b.Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c.Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power

4

Page 3 Page 5
Page 4
Image 4
Black & Decker HP362, 90528103 manual Intended use, Safety instructions, Personal safety
Page 3 Page 5

HP362, 90528103 specifications

The Black & Decker 90528103, HP362 is an innovative and versatile tool designed to meet the needs of both DIY enthusiasts and professionals alike. This product is an excellent combination of performance, durability, and user-friendly features, making it a popular choice among those who value efficiency and reliability in their power tools.

One of the standout features of the HP362 is its powerful 6-amp motor, which provides ample strength for a variety of tasks. Whether you're drilling through wood, metal, or plastic, this tool offers the torque and speed required to complete projects effectively. The variable speed settings allow users to adjust the drilling speed according to the material, enabling precise control and ensuring a clean finish every time.

The design of the HP362 is ergonomic, with a comfortable grip that reduces fatigue during extended use. The lightweight construction makes it easy to maneuver, allowing users to reach tight spaces without straining. Additionally, the inclusion of a keyless chuck simplifies bit changes, promoting quick and efficient tool adjustments.

This model also comes equipped with a reverse function, which is invaluable for tasks that require removing screws or backing out drill bits. This reverse feature adds to the overall versatility of the tool, making it suitable for a wide range of applications, from assembling furniture to home repairs.

A significant technological advancement included in the Black & Decker 90528103 is its integrated LED work light. This feature enhances visibility in dark or confined areas, ensuring that users can maintain precision in their work, regardless of the lighting conditions.

Durability is another key characteristic, as this unit is built to withstand the rigors of daily use. Quality materials are used in the construction of the HP362, ensuring that it remains reliable over time.

In summary, the Black & Decker 90528103, HP362 combines power, durability, and advanced features in a user-friendly package. Whether tackling home improvement projects or professional tasks, this tool is designed to provide the performance and reliability that users have come to expect from one of the leading brands in the power tools market. With its ergonomic design, variable speed controls, and added technological enhancements, the HP362 stands out as a top choice for power tool enthusiasts.
Top Page Image Contents