Product may vary slightly from what is illustrated.
| |
|
| | |
1. | Spray nozzle | Symbols | |
2. | Water fill cover | Dry | |
3. | Steam/dry/auto clean® | ||
|
How to Use
This appliance is for household use only.
GETTING STARTED
•Remove all labels, tags and stickers attached to the body, cord or soleplate of the iron.
•Please go to www.prodprotect.com/applica to register your warranty.
•Remove and save literature.
•Flip up the
Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system.
•If ironing dry, place appliance on its heel rest on a stable ironing board.
•Uncoil cord and plug into standard electrical outlet.
|
|
|
|
|
|
|
| For Steam Ironing: Turn the Steam/Dry/Auto Clean to the | |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| steam symbol | . Turn the temperature dial to the appropriate |
|
|
|
|
|
|
|
| setting for your fabric. The temperature ready light will come | |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| on, and stay on until the iron has reached the set temperature. | |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| The light will cycle on and off during ironing. Use the fabric | |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| guide on the heel rest (A) to help you select the setting | |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| (check the garment label for fabric type and manufacturer’s | |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
A |
|
|
|
|
|
|
| recommended setting.) | |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
For optimum performance at any steam setting, let the iron stand until the temperature ready light goes out (approximately 60 to 90 seconds) before beginning to iron. When finished ironing on any steam setting, turn the temperature dial to MIN before unplugging the iron.
For Dry Ironing: Turn the Steam/Dry/Auto Clean to the dry symbol 
. You may want to empty the water. (See Care and Cleaning .) Use the fabric guide on the heel rest to help select the setting (A), then turn the temperature dial to the appropriate setting for your fabric. The temperature ready light will come on, and stay on until the iron has reached the set temperature. The light will cycle on and off during ironing.
3-WAY AUTOMATIC SHUTOFF
The automatic shutoff feature in your iron works as follows:
ENGLISH
4. | Spray button |
|
5. | Steam surge button | Steam |
6. |
| |
7. | Power on/auto off Indicator light | Steam Surge |
8. | Heel rest | |
9. | Temperature dial |
|
10. Water window with MAX mark | Spray | |
|
| |
30 seconds
8 minutes
B
SURGE OF STEAM
•Once the iron reaches appropriate temperature, it will turn off after 30 seconds of inactivity if left on its soleplate or tipped over on its side. If left vertically on its heel rest, it will shut off after 8 minutes (B).
•The auto off light starts blinking red to let you know that the iron has stopped heating.
•As soon as you pick up the iron, it will start heating again. Wait for iron to reheat completely before resuming operation.
Auto Clean® System
•For horizontal steam surge: Be sure water window is filled to the MAX line. For optimum performance of steam surge with any steam setting, turn the dial to the desired steam setting, then let the iron stand on its heel rest for 60 seconds before pressing the steam surge button 
. For tough wrinkles, turn the temperature dial to the highest setting and pump the steam surge button a few times for a blast of concentrated steam. For best performance, use steam surge at 5 second intervals.
