4. Place the cover on top of the pulp separator with feeder in place (H).

H

Juicing Tips

When juicing carrots, do not overfill the food chute. Place carrots one by one and use gentle pressure.

Juicing avocados or bananas will produce a puree rather than a juice.

J

OFF

 

LOW

 

HI

K

5.Lock the locking latches by pressing down the cover as you fit the tab at the top of each latch into the groove on each side of the cover. Press the bottom of each latch until you hear it click into place (J).

Important: The unit will not operate until the locking latches are locked.

6.Place the juice cup under the juice spout (K).

7.Cut food into pieces to fit the food chute.

8.Plug unit into an AC outlet. Turn the unit on by turning the control to the Low or High speed position.

9.Place food in the food chute and press lightly with feeder.

When juicing large quantities of fruits and vegetables, stop and empty the pulp container as it begins to get full and clean the cutter/strainer before you start juicing again.

Care and Cleaning

This product contains no user serviceable parts. Refer service to qualified service personnel.

To Clean the Unit

Always clean all parts after every use to prolong the life of the unit.

1. Turn unit OFF and unplug from electric outlet.

10.Every time the pulp container is almost full, turn off and unplug the unit, empty the pulp container and clean the cutter/strainer before you start juicing again.

Caution: The cutter/strainer teeth are very sharp. Handle carefully.

11.When juicing is completed, turn off unit and unplug from outlet.

Food Tray

1.Follow steps 1-3 in the HOW TO ASSEMBLE AND USE section.

2.Place the cover on top of the pulp separator.

3. Insert food tray through the food chute and place on top of the cover (L).

L

4. Insert feeder through the food chute on the food tray (M).

Note: Use the food tray to hold small fruits, such as berries, grapes, mixed fruit pieces or mixed vegetable pieces as you process them through the food chute.

5. Follow steps 5-11 in the How to assemble and Use section.

M

2.

Disassemble all parts. See How to Disassemble section.

3.

Wash the feeder, food chute, cover, cutter/strainer, pulp separator, juice spout,

 

juice cup and pulp container in warm sudsy water or in the dishwasher (top rack

 

only).

Caution: The cutter/strainer teeth are very sharp. Handle carefully.

4.Wipe the base with a damp cloth or sponge. Never immerse the unit in water. Note: Over time, parts may change color (especially from juicing carrots or beets).

To Store the Unit

Fold the cable into the cord storage compartment on the side of the unit (N).

N

5

6

Page 4
Image 4
Black & Decker JE2050, JE2060GY, JE2060BL Care and Cleaning, Juicing Tips, To Clean the Unit, Food Tray, To Store the Unit