ENGLISH
Use
1.Place the appliance on a flat, stable surface and connect it to the electrical supply.
2.Select the required speed (l or ll) using the rotary switch.
3.Remove the pusher & add the ingredients, using the pusher to guide the ingredients onto the blades.
While you are preparing juice, you can empty the pulp container by switching the appliance off and carefully removing the pulp container.
Note: Reassemble the empty pulp container before you continue juicing.
4.When juicing is completed, return the control to the O (off) position.
The appliance should be disconnected from the mains supply before
removing the jug.
The Juicer should not be run for longer than 1 Minute. After each 1 Minute use, the Juicer should be allowed to cool for at least 1 minute. After 3 consecutive cycles the juicer must be allowed to cool for 15 minutes before further use.
Useful advice
•Wash the fruit carefully before juicing.
•Use fresh fruit and vegetables, as they contain more juice. Pineapples, celery stalks, apples, cucumbers, carrots, melons, tomatoes, oranges and grapes are particularly suitable for processing in the juice extractor.
•You do not need to remove the peels or
skins. You only need to peel fruit with thick skin: citrus fruit, pineapple (remove the centre stalk).
•Fruits that contain starch, such as bananas, papayas, avocados, figs, strawberries and mangoes are not suitable for processing in the juice extractor. Use a food processor, blender or stick blender to process these fruits.
•The juicer is not suitable for processing very hard and/or fibrous/starchy fruits or vegetables such as sugar cane.
•Choose fresh, ripe fruit and vegetables, they will yield more juice.
•Drink the juice immediately after you have extracted it. If it is exposed to air for some time, the juice will lose its taste and nutritional value.
•To extract the maximum amount of juice, always press the pusher down slowly.
Maintenance & cleaning
•Switch the appliance off, remove the plug from the wall socket and wait until the rotary sieve has stopped rotating before cleaning, changing accessories or approaching parts that move during use.
•The appliance is easier to clean if you do so immediately after use.
•Do not use abrasive cleaning agents, scourers, acetone, alcohol etc. to clean the appliance.
•All detachable parts, except the rotary sieve, are
6
