5. Service
a.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Additional Safety Instructions for Blowers
•Do not collect still smoldering cigarette ashes, freshly cut metals shaving, screws, nails and the like.
•Never block suction inlet and outlet.
Warning symbols
Read the operation manual and follow all warnings and safety instructions.
Do not use your saw in wet conditions or expose it to rain.
Always wear eye protection.
Always wear ear protection.
Beware of falling objects.
Keep bystanders away.
Do not touch the fan.
Electrical safety
This tool is double insulated; therefore no earth wire is required. Always
check that the power supply corresponds to the voltage on the rating plate.
Features
This tool includes the following features:
1. Nozzle
ENGLISH
2.Blast Port
3.Trigger Switch
4.Variable Speed Knob
5.
6.Suction Port
7.Dust Bag
Assembly
Warning! Before assembly, make sure that the tool is switched off and unplug.
Use
Mounting The Nozzle For
Blowing Operations (fig. A)
•Insert the pin located inside the Nozzle into the notch provided on the Blast Port (1)
•To lock Nozzle in place, turn the Nozzle in the direction indicated.
•To remove Nozzle, turn the Nozzle in the opposite direction.
Mounting The Nozzle And Dust For DustCollection (fig. B)
•For dust collection, mount the Dust Bag at the Blast Port (2) and Nozzle at the Suction Port
(6)
•To remove Dust Bag and Nozzle, simply pull out by first turning in the opposite direction.
•Empty the Dust Bag frequently to ensure maximum dust collecting efficiency.
Operating The Blower (fig. C)
•To switch your Blower on, depress the Switch
(3). To stop your Blower, release Switch.
5