Black & Decker LDX220SBR Ansi Z87.1 eye protection CAN/CSA Z94.3, Amperes, Volts Hertz Watts

• When not in use, place tool on its side on a stable surface where it will not cause a tripping or falling hazard. . Some tools with large battery packs will stand upright but may be easily knocked over

• Keep your hair, clothing, and gloves away from air vents. Air vents often cover moving parts in which these items can be caught.

• Hold tool firmly with two hands, one hand on the handle, and the other gripping the bottom around the battery area. Use auxiliary handle if provided. Loss of control can cause personal injury.

Some dust created by power sanding, sawing, grinding, drilling, andWARNING:other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.

Use of this tool can generate and/or disperse dust, which may WARNING:cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.

WARNING: ALWAYS use safety glasses. Everyday eye glasses are NOT safety
glasses. Also use face or dust mask if cutting operation is dusty.
	• ANSI Z87.1 eye protection (CAN/CSA Z94.3)
ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
	• ANSI S12.6 (S3.19) hearing protection
	• NIOSH/OSHA/MSHA respiratory protection
The label on your tool may include the following symbols					amperes
V		volts	A
Hz		hertz	W		watts
min		minutes		......................	alternating
			no		current
		......................direct current			no load speed
	..........................	Class II Construction		........................	earthing terminal
			.../min
	........................	safety alert symbol			revolutions or
					reciprocations per minute

4