FUNCTIONAL DESCRIPTION |
|
|
| ||
1. Variable speed switch |
|
| 5 | ||
2. Forward/reverse button |
|
|
| ||
3. Torque adjustment collar | 4 |
|
| ||
4. Keyless chuck |
| 3 |
| ||
5. Dual range gearing |
| 6 |
| ||
6. LED work light |
|
| 2 | ||
7. Battery |
|
|
| ||
8. Battery release button |
| 1 |
| ||
9. Charger |
|
|
| ||
10. Screwdriver bit holder |
|
|
| ||
|
|
| 10 |
| |
| 9 |
| 8 | 7 | |
IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY | |||||
| |||||
CHARGERS |
|
|
| ||
SAVE THESE INSTRUCTIONS: This manual contains important safety instructions for | |||||
battery chargers. |
|
|
| ||
• Before using charger,read all instructionsand cautionarymarkings on charger,battery | |||||
| pack, and product using battery pack. |
|
|
| |
| WARNING: Shock hazard. Do not allow any liquid to get inside charger. |
| |||
| CAUTION: Burn hazard. To reduce the risk of injury, charge only designated Black & | ||||
| Decker batteries. Other types of batteries may burst causing personal injury and | ||||
| damage. |
|
|
| |
| CAUTION: Under certain conditions, with the charger plugged in to the power supply, | ||||
| the charger can be shorted by foreign material. Foreign materials of a conductive nature | ||||
| such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles | ||||
| should be kept away from charger cavities. Always unplug the charger from the power | ||||
| supply when there is no battery pack in the cavity. Unplug charger before attempting to | ||||
| clean. |
|
|
| |
• | WARNING: |
|
|
| |
DO NOT attempt to charge the battery pack with any chargers other than the ones | |||||
• | in this manual. The charger and battery pack are specifically designed to work together. | ||||
These chargers are not intended for any uses other than charging designated | |||||
| Black & Decker rechargeable batteries. | Any other uses may result in risk of fire, | |||
• | electric shock or electrocution. |
|
|
| |
Do not expose charger to rain or snow. |
|
|
| ||
• | Pull by plug rather than cord when disconnecting charger. This will reduce risk of | ||||
• | damage to electric plug and cord. |
|
|
| |
Make sure that cord is located so that it will not be stepped on, tripped over, or | |||||
| otherwise subjected to damage or stress. |
|
| ||
• Do not use an extension cord unless it is absolutely necessary. Use of improper | |||||
• | extension cord could result in risk of fire, electric shock, or electrocution. |
| |||
An extension cord must have adequate wire size (AWG or American Wire Gauge) | |||||
| for safety. The smaller the gauge number of the wire, the greater the capacity of the | ||||
| cable, that is 16 gauge has more capacity than 18 gauge. When using more than one | ||||
| extension to make up the total length, be sure each individual extension contains at least | ||||
| the minimum wire size. |
|
|
| |
5
