English
Assembly
Warning! Before assembly, make sure that the appliance is switched off and unplugged.
Fitting and removing an attachment
•Use the beaters (4) for blending, beating, mixing, whisking & creaming.
•Use the dough hooks (5) for kneading.
Assembling the beaters / dough hooks (Fig. C)
Fit the required beaters through the holes in the platform (8) or motor housing (4) & push so they are fully home in the Mixer.
Note: Beater (5B & 6B) must be fitted into the larger hole (13) on the motor housing (4) or platform (8 - M650 only).
The beaters can be removed by pressing down on the release button (2).
Note: The speed control (1) must be at the 0 "Off" position before the beaters can be ejected.
Note: The platform (8) should be in the raised position before the beaters are ejected.
Stand Assembly (Fig. D - M650 only)
With the beaters removed, place the Mixer on the platform (8) such that the 3 holes align with the catches & pin. Press down to lock the Mixer in place.
Press the pivot plate (11) on the back of the platform & lift it to the raised position.
Fit the required beaters through the holes in the platform & push so they are fully home in the Mixer.
Lower the Mixer to the operating position, ensuring it locks in place.
Use
M300:
Fit the required beaters to the appliance by inserting them into the 2 holes & pushing until they are fully home.
Connect the appliance to a suitable electrical supply.
Place the beaters in the ingredients & move the speed selector (1) to the desired speed.
Once mixing is completed, the selector should be returned to the 0 ("Off") position.
Once the switch is in the 0 position & all parts have stopped moving, the beaters can be removed by pressing down on the release button.
M650 (Fig. E):
With the beaters removed, place the Mixer on the platform such that the 3 holes align with the catches & pin. Press down to lock the Mixer in place.
Press the pivot plate (11) on the back of the platform & lift it to the raised position.
Fit the required beaters through the holes in the platform & push so they are fully home in the Mixer.
Note: One beater (5B & 6B) must be fitted into the larger hole (13) on the motor housing (4) or platform (8 - M650 only).
Add the ingredients to the bowl (10) , place the bowl on the stand (7) , and lower the Mixer to the operating position.
Move the speed selector (1) to the desired speed.
Once mixing is completed, the selector should be returned to the 0 ("Off") position.
Press the pivot plate (11) on the back of the platform (8) & lift it to the raised position.
The beaters can be removed by pressing down on the release button (2).