Husqvarna Pro 18 AWD manual Maintenance, Assembly

MAINTENANCE

7.Pull the pump belt off of the engine’s pulley and move it under the engine belt pulleys.

8.Pull out the pump belt through the opening under the pivot bearing and past the belt tensioner’s disc.

Assembly

1.Pull the pump belt through the opening under the pivot bearing and on the outside past the belt tensioner’s disc.

2.Fit the pump belt on the engine’s pulley, move it under the engine belt pulleys.

3.Fit the belt on the hydrostatic transmission’s pulley.

4.Fit the cooling fan.

5.Tighten the cooling fan nut (2).

6.Check that the centre belt is fitted correctly on its front pulley and fit the centre belt on the engine’s pulley.

7.Fit the hose clip on the middle and the belt guide for the centre belt.

8.Hook the spring on the belt tensioner (A) on the screw (B).

8009-640

8009-640

6012-036

8009-364

A

B

6020-005

English – 37