Husqvarna Pro 18 AWD manual The Cutting Unit’s Service Position, Placing in the Service Position

MAINTENANCE

The Cutting Unit’s Service Position

In order to provide good accessibility for cleaning, repair and servicing, the unit can be set in the service position. The service position means that the unit is raised and locked in the vertical position.

Placing in the Service Position

1.Place the machine so it is flat. Activate the parking brake (A). Set the cutting deck to the lowest cutting height and lower the cutting unit

(B).

8009-587

2.Remove the front cover by loosening the split pin. (Complete instructions for the service position can be found on the inside of the front cover).

3.Loosen the two anti-scalp rollers, located under the front cover.

6017-219

6017-220

48 – English