Husqvarna Pro 18 AWD manual Replacing the Hydraulic Pump’s Drive Belt, Maintenance

MAINTENANCE

Replacing the Hydraulic Pump’s Drive

Belt

Pro 18 AWD

Removal

1.Remove the transmission cover.

2.Unhook the spring on the belt tensioner.

3. Remove the belt guide for the centre belt.

4.Pull off the centre belt from the engine’s pulley and pull out the rear section. A used belt can be pulled downwards. When the belt is new, the centre belt must be pulled off of its front pulley whereupon it can be moved downwards from the engine pulley so that the rear part can be pulled out.

5.Remove the nut on the cooling fan. Counter hold using a punch in one of the holes on the underside of the fan when the nut is loosened.

8009-603

8009-637

8009-727

8009-638

8009-726

38 – English