Husqvarna Replacing the Front Belt Pro 15, Pro, Replacing the Front Belt Pro 18 AWD, Assembly

MAINTENANCE

Replacing the Front Belt Pro 15, Pro 18

Dismantling

The entire belt is removed according to the following when a snow blade is to be attached to the machine.

1.Remove the cutting unit.

2.Loosen the belt guides and the support pully.

3.Loosen the wheel on the belt tensioner.

4.Ease off the belt from the middle pulley and remove the belt.

Assembly

1.Fit the belt on the centre pulley.

2.Move the belt into position and fit the belt on the belt tensioner.

3.Position the belt on the support pulley and tighten the belt guide.

4.Fit the cutting equipment.

Replacing the Front Belt Pro 18 AWD

Dismantling

The entire belt is removed according to the following when a snow blade is to be attached to the machine.

1.Put the cutting unit in the service position.

2.Pull the centre belt off of the centre pulley. The belt becomes slack when the cutting unit is lifted.

3.Take off the front belt from the centre pulley and remove the belt.

Assembly

1.Position the belt from the front. Pull the belt on the outside of the runner pulley and on the inside of the adjuster pulley.

￿ 9￿

8009-227

6017-227

8009-684

8009-596

English – 41