Model 9200 Programmable Dual-loop Controller

Chapter 1 - INSTALLATION

Mounting

The Series 9200 Operator Interface mounts into a panel or on a plate by using the enclosed 8 mounting brackets. With the exception of the Operator Interface, these items can be mounted on a standard DIN rail for mounting inside an electrical enclosure. SSi supplies a 10 foot communications cord with the two connectors and the piece of DIN rail required for the components that have been ordered.

Operator Interface Cutout: 7.40”W X 5.56”H

Default “Status” screen

Display

The Status display shows the atmosphere and temperature controller information as well as an overview of the programmer. There are six active buttons on the status display: Loops, Menu, Program, Quench Zone, Chart and Alarm Ack. One hidden button is located behind the

SSi Logo. By activating this button selected Software and Firmware information will be displayed.

The “Loops” button will switch the display to the two control loops, % Carbon on the left and Temperature on the right.

The “Menu” button will switch to the menu. The “blue” UP and DOWN arrow keys move you from one selection to another. The “Enter” button will enter the selected Menu Screen, if access is authorized.

The “Program” button will switch to the Program Display. This is a companion display to the status screen and is described below.

The “Quench Zone” button will switch to the Quench and Zone display. This is a companion display to the status screen and is described below.

SSi Manual SERIES 9200

9

Programmable Dual-loop

Page 9
Image 9
SSI America 9200 user manual Installation