Model 9200 Programmable Dual-loop Controller
SSi Manual SERIES 9200 40 Programmable Dual-loop
Highlighting “Alarm ??” and pressing the “Enter” key displays an alpha-numeric keyboard. Type the Alarm
Text that you wish to be displayed. Pressing the “Enter” key returns you to the previous screen
“Passcodes”. These text Messages will be displayed on the Loops Screen when generated by the program
and active.
IP Address
Highlighting “IP Address” and pressing the “Enter” key displays the following screen.
Parameter Value
IP Address 1 192
IP Address 2 168
IP Address 3 1
IP Address 4 200
IP Address Mask 1 255
IP Address Mask 2 255
IP Address Mask 3 255
IP Address Mask 4 0
IP Address Gateway 1 192
IP Address Gateway 2 168
IP Address Gateway 3 1
IP Address Gateway 4 1
Highlighting whichever parameter that needs to be entered and pressing the “Enter” key displays a numeric
keypad that can be used to enter the required “value”. Pressing the “Esc” key returns you to the
configuration menu.
The default IP address is: 192.168.1.200
The default IP Address Gateway is: 192.168.1.1
Event Control
Pressing the “Enter” key makes the following screen appear.