Model 9200 Programmable Dual-loop Controller
Menus
There are three levels of menus in the Series 9200.
•The first level is the operator level. These are functions or operations that are typically handled by the furnace operator. This menu is accessed without the need for a pass code.
•The second level is to be used by a supervisor. This level requires the entry the level 1 or level 2 pass code.
•The third level is the configuration level. This requires the level 2 pass code ONLY.
As shipped, the level 1 and level 2 codes are set as “1” and “2” respectively. The pass codes can be changed at the Passcode and Alarm Screen.”
The “Menu” has five operating buttons located on the right side of the screen. The “UP” arrow moves the cursor from bottom to top. The “Enter” button activates the selection that the operator has chosen, the “DOWN” arrow key moves the cursor from top to bottom, the “Login” key activates another screen that allows access to the supervisor menu and the configuration menu, and the “Esc” key takes you back to the previous screen without any action being taken.
The selections on the menu that are generally used by the furnace operator are:
•Program edit
•Burn off.
•Auxiliary Instruments.
•Auxiliary Analog Input.
•Shutdown
The “Burn off display” shows the following information:
SSi Manual SERIES 9200 | 13 | Programmable |
