Model 9200 Programmable Dual-loop Controller
Alternate PID Setup
Pressing the “Enter” key makes the following screen appear.
This screen is used to enable up to 16 sets of alternate PID’s for Control purposes. It is implemented with the PID Select Opcode in the program.
By using the upper Blue Up and Down Arrow, you can highlight the PID set to be modified, then press “Enter” to display the Parameters associated with that PID Set. By using the Lower Blue Up and Down Arrows (above and below the “Enter”, you can highlight the desired parameter. Once highlighted, pressing “Enter” will display a Numeric Keypad, with the Current Value Displayed. By selecting the new value and “Enter’, you have entered the new desired value. Pressing “Esc” will return you to the PID Setup Screen.
Pressing “Esc” will return you to the Main Menu.
Analog Input Board Setup
Used by SSi personnel.
AI Board Calibration
Used by SSi personnel.
SSi Manual SERIES 9200 | 55 | Programmable |
