Model 9200 Programmable Dual-loop Controller
To edit a step in the recipe, using the “UP” and “DOWN” arrow keys, highlight the step that you wish to edit and press the “Enter” key. This will take you to a display that looks like the following:
Parameter | Value | ||
Opcode | SOAK |
| |
|
|
| |
|
|
|
|
Time (hh:mm) |
| 1:00 |
|
Enter |
Set |
Cancel |
Highlighting the parameter that you wish to edit and pressing the “Enter” key takes you to the appropriate menu, either that of the Opcode choices, or a numeric keypad to allow you to change the time.
After making the change, press the “Set” button twice to have the change take place. This returns you to the “program edit” screen. At this time you can choose to save the program as the same number, or if you have edited the program to save the program as a new “recipe” number, make the choice at this time and press the “Save” button. This is a quick way to make new recipes using an already existing recipe and changing only those steps that need to be changed.
Pressing the “Cancel” button on either display takes you back to the “edit” screen without making any changes.
SSi Manual SERIES 9200 | 57 | Programmable |
