Model 9200 Programmable Dual-loop Controller
Default Wait Limits
Pressing the “Enter” key takes you to the “Wait Limit Setup” screen.
Parameter | Value |
Temperature Wait Limit | 15 ° |
Atmosphere Wait Limit | 0.10 % Carbon |
|
|
|
|
The wait limits are used in the recipe programming. A wait limit allows the program to move to the next step once the process variable (or the actual furnace) has gotten to within the default “wait limits” that are indicated on this screen.
Highlighting your choice to be changed and pressing the “Enter” key moves you to a numeric keypad that allows you to enter a new value by touching the appropriate keys. Once the you have made the change pressing the “Enter” key takes you back to the previous screen. Once again pressing the “Esc” key takes you back to the previous screen without making the changes.
Pressing the “Esc” key returns you to the “Menu” screen.
Furnace Name
Highlighting this selection and pressing the “Enter” key displays the following “Furnace Name” screen.
Parameter | Value |
Furnace Name | ?????????????? |
PV1 Name | Temperature |
PV2 Name | Temperature |
PV3 Name | Temperature |
|
|
Highlighting “furnace name” and pressing the “Enter” key displays an alphanumeric keyboard. Type the furnace name that you wish to be displayed. Pressing the “Enter” key returns you to the previous screen “Furnace Name”
Pressing the “Esc” key returns you to the “Menu” screen.
SSi Manual SERIES 9200 | 34 | Programmable |
