SSI America user manual Model 9200 Programmable Dual-loop Controller

Model 9200 Programmable Dual-loop Controller

Auxiliary Instruments (Read-only)

The “Auxiliary Instruments display” shows the following information:

The instruments slaved to the Series 9200 and their process variable

Auxiliary Analog Input (Read-only)

The “Auxiliary Analog Input display” shows the information from any attached analog input modules such as: load T/C’s, flows from Waukee-Tronic flow meters, etc.

Shutdown (Display)

The “Shutdown” selection pops up another screen asking whether or not you wish to shutdown the interface with the Series 9200. Two responses are possible “Yes” or “No”.

“Yes” shows you a typical computer screen with the “start” button in the bottom left-hand corner. You can now turn the power off to the operator interface without upsetting any of the settings. The “No” response returns you to the initial status screen. Remember that shutting down the operator interface does not shutdown the Series 9200 Controller.

Adjust Date and Time

Pressing “Enter” moves you to screen “Clock setup”

Highlighting the date and pressing “Enter” moves you to a screen “Date Edit”

The current date in the Series 9200 is displayed as well as the date on a scroll type display. Touching the individual parts of the date ((day (Monday, Tuesday, etc.), Month, day and year)) will highlight that portion of the date, and using the little “up” and “down” arrow keys will allow you to adjust the highlighted value.

Pressing the “Set” button makes the change permanent.

If you desire to change the “time”… highlight the time and press the “Enter” key. The next screen is the “time edit” screen. To enter the “hour” press the “hour” key in the upper right-hand corner. If you want to change the minutes press the “min” key. The next screen that pops up in both cases is a numeric keypad. Enter the minutes that you wish to change the time to and press the “Set” key. If you DO NOT wish to make any changes press the “Cancel” key. Note, if you wish to only change the minutes, you must also enter the hour in 24 hour (Military) format.

Pressing the “Cancel” key takes you back to the “Clock Setup” screen.

Slave Communications Status

Pressing the “Enter” key displays the auxiliary instruments and their status, if any.

SSi Manual SERIES 9200 23 Programmable Dual-loop