Alpine TDA-7548E Controlling CD Shuttle, Optional, When a 6-disc CD Shuttle is connected

		English
		CD Shuttle Operation
1		Controlling CD Shuttle
		(Optional)
	2
		An optional Alpine CD Shuttle may be con-
		nected to the Ai-NET connector of the TDA-
		7548E/TDA-7547E. All of the CD functions can
		be accessed through the head unit's front
		panel.
		The TDA-7548E/TDA-7547E can control
		multiple Alpine Shuttles when connected
		through the Multi-Changer Switching device(s)
		(KCA-400C). See the Multi-Changer Selection
		section on page 42 for selecting the CD
		Shuttles.
		Note: The CD controls on the TDA-7548E/
		TDA-7547E will function only when a
		CD Shuttle is connected.
1		The display example shows when playing Track
		5 on Disc 3.
SOURCE	90.10
A.S.U.		Press the SOURCE button to activate the CD
		Shuttle. The display shows the disc number
		and track number.
	TAPE	Note: To start play or pause playback, press
		the :/J button.

D-3T05 2'58

2

D.A.P. 1	MONO 2	3
M.I.X. 4	RPT 5	SCAN 6
B. SKIP

When a 6-disc CD Shuttle is connected:

Make sure that the Function indicator illumi- nated. Press the Preset buttons or 8 and

9buttons to select the desired disc loaded in the CD Shuttle.

When a 12-disc CD Shuttle is connected: To select the disc numbers from 1 to 6, the procedure is the same as for the 6-disc CD Shuttle. To select the disc numbers from 7 to 12, first press the "F" button to change the "D–" indicator to "d–," then press the desired Preset button. When the "F" button is first pressed, the Preset buttons 1 to 6 act as 7 to 12 respec- tively.

You can also use the 8 and 9 buttons to select a desired disc.

33